Back
From: metabase:user:30f0bd62-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Tie-Handle-HTTP-0.02 v5.15.5 OpenBSD
Date: 2011-12-10T08:56:26Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Jonathan Steinert,
This is a computer-generated report for Tie-Handle-HTTP-0.02
on perl 5.15.5, created by CPAN-Reporter-1.2002.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sts/cpansmoke/perl-5.15.5/bin/perl5.15.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-Tie-Handle-HTTP.t .. ok
t/09-file.t ............. ok
# Failed test 'Tie succeeded'
# at t/10-all.t line 38.
# Failed test 'not at end of file yet'
# at t/10-all.t line 39.
tell() on unopened filehandle FOO at t/Common.perl line 8.
# Failed test 'Start at 0'
# at t/Common.perl line 8.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 9.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 11.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
seek() on unopened filehandle FOO at t/Common.perl line 13.
# Failed test 'Seek success'
# at t/Common.perl line 13.
tell() on unopened filehandle FOO at t/Common.perl line 14.
# Failed test 'Seek to 0'
# at t/Common.perl line 14.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 16.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 18.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 88 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 88 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 20.
seek() on unopened filehandle FOO at t/Common.perl line 23.
# Failed test 'Seek success'
# at t/Common.perl line 23.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 82 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 82 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Looks like you failed 53 tests of 61.
t/10-all.t ..............
Dubious, test returned 53 (wstat 13568, 0x3500)
Failed 53/61 subtests
Test Summary Report
-------------------
t/10-all.t (Wstat: 13568 Tests: 61 Failed: 53)
Failed tests: 1-8, 10-17, 19-27, 29-36, 38-45, 47-55
57-59
Non-zero exit status: 53
Files=3, Tests=123, 75 wallclock secs ( 0.06 usr 0.04 sys + 0.34 cusr 0.06 csys = 0.50 CPU)
Result: FAIL
Failed 1/3 test programs. 53/123 subtests failed.
*** Error code 53
Stop in /home/sts/cpansmoke/perl-5.15.5/cpan/build/Tie-Handle-HTTP-0.02-Wi_8B3 (line 836 of Makefile).
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- -------
Errno 0 1.15
HTTP::Daemon 0 6.00
HTTP::Request 0 6.00
HTTP::Response 0 6.01
HTTP::Status 0 6.00
LWP::UserAgent 0 6.03
Symbol 0 1.07
Test::More 0 0.98
build_requires:
Module Need Have
------------------- ---- -------
ExtUtils::MakeMaker 0 6.63_02
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/sts/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 29802
PERL5_CPAN_IS_RUNNING = 29802
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 20773,29802
PERL_CR_SMOKER_CURRENT = Tie-Handle-HTTP-0.02
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
TMPDIR = /home/sts/cpansmoke/tmp
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sts/cpansmoke/perl-5.15.5/bin/perl5.15.5
$UID/$EUID = 1000 / 1000
$GID = 10 10 0
$EGID = 10 10 0
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
CPAN::Meta 2.112621
Cwd 3.37
ExtUtils::CBuilder 0.280204
ExtUtils::Command 1.17
ExtUtils::Install 1.57
ExtUtils::MakeMaker 6.63_02
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.05
File::Spec 3.34
JSON n/a
JSON::PP 2.27200
Module::Build 0.39_01
Module::Signature n/a
Parse::CPAN::Meta 1.4401
Test::Harness 3.23
Test::More 0.98
YAML n/a
YAML::Syck n/a
version 0.93
--
Summary of my perl5 (revision 5 version 15 subversion 5) configuration:
Platform:
osname=openbsd, osvers=5.0, archname=OpenBSD.i386-openbsd-thread-multi
uname='openbsd cpansmoke3 5.0 generic.mp#59 i386 '
config_args='-des -Dusedevel -Dusethreads -Dprefix=/home/sts/cpansmoke/perl-5.15.5'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.0'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.60.1, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY MYMALLOC PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_USE_DEVEL
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under openbsd
Compiled at Nov 20 2011 22:32:20
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="29802"
PERL5_CPAN_IS_RUNNING="29802"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="20773,29802"
PERL_CR_SMOKER_CURRENT="Tie-Handle-HTTP-0.02"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sts/cpansmoke/perl-5.15.5/lib/site_perl/5.15.5/OpenBSD.i386-openbsd-thread-multi
/home/sts/cpansmoke/perl-5.15.5/lib/site_perl/5.15.5
/home/sts/cpansmoke/perl-5.15.5/lib/5.15.5/OpenBSD.i386-openbsd-thread-multi
/home/sts/cpansmoke/perl-5.15.5/lib/5.15.5
.