Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Typed-0.11 v5.8.9 FreeBSD
Date: 2014-02-19T04:25:23Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear BPMEDLEY,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9146. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare-clang/perl-5.8.9/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Typed;'
# at t/000_load.t line 7.
# Tried to use 'Typed'.
# Error: Can't locate feature.pm in @INC (@INC contains: /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/arch /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/5.8.9/amd64-freebsd /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/5.8.9 /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/site_perl/5.8.9/amd64-freebsd /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/site_perl/5.8.9 .) at /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib/Typed.pm line 5.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib/Typed.pm line 5.
# Compilation failed in require at t/000_load.t line 7.
# BEGIN failed--compilation aborted at t/000_load.t line 7.
# Looks like you failed 1 test of 1.
t/000_load.t ...
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Failed test 'use Typed;'
# at t/001_types.t line 12.
# Tried to use 'Typed'.
# Error: Can't locate feature.pm in @INC (@INC contains: /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/arch /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/arch /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/5.8.9/amd64-freebsd /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/5.8.9 /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/site_perl/5.8.9/amd64-freebsd /usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/site_perl/5.8.9 .) at /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib/Typed.pm line 5.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib/Typed.pm line 5.
# Compilation failed in require at t/001_types.t line 12.
# BEGIN failed--compilation aborted at t/001_types.t line 12.
String found where operator expected at t/001_types.t line 18, near "has 'Class'"
(Do you need to predeclare has?)
syntax error at t/001_types.t line 14, near "has NoIsa"
Execution of t/001_types.t aborted due to compilation errors.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 1.
t/001_types.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/000_load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/001_types.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=2, Tests=2, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.04 cusr 0.01 csys = 0.08 CPU)
Result: FAIL
Failed 2/2 test programs. 2/2 subtests failed.
*** [test_dynamic] Error code 255
Stop in /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
feature
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'BPMEDLEY (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'feature' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Exporter::Tiny 0.034 0
Type::Tiny 0.038 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9146
CPANPLUS::Dist::Build 0.76
Cwd 3.40
ExtUtils::CBuilder 0.280212
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.88
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.22
File::Spec 3.40
Module::Build 0.4204
Pod::Parser 1.35
Pod::Simple 3.28
Test::Harness 3.30
Test::More 1.001002
version 0.9907
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/lib:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/arch:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/lib:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/arch:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 94284
PERL5_CPANPLUS_IS_VERSION = 0.9146
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare-clang/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare-clang/perl-5.8.9/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=freebsd, osvers=9.2-release, archname=amd64-freebsd
uname='freebsd fremen 9.2-release freebsd 9.2-release #0 r255898: thu sep 26 22:50:31 utc 2013 root@bake.isc.freebsd.org:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare-clang/perl-5.8.9 -Dcc=clang'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='clang', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 3.3 (tags/RELEASE_33/final 183502)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='clang', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under freebsd
Compiled at Nov 11 2013 14:46:47
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/lib:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/arch:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/lib:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/arch:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib:/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="94284"
PERL5_CPANPLUS_IS_VERSION="0.9146"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/lib
/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Exporter-Tiny-0.034/blib/arch
/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/lib
/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Type-Tiny-0.038/blib/arch
/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/lib
/usr/home/cpan/pit/bare-clang/conf/perl-5.8.9/.cpanplus/5.8.9/build/Typed-0.11/blib/arch
/usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/5.8.9/amd64-freebsd
/usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/5.8.9
/usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/site_perl/5.8.9/amd64-freebsd
/usr/home/cpan/pit/bare-clang/perl-5.8.9/lib/site_perl/5.8.9
.