Plack-Middleware-ServerStatus-Lite v0.36 Perl 5 v5.18.1 x86_64-linux-ld
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Plack-Middleware-ServerStatus-Lite v0.36
- Platform
- Perl 5 v5.18.1 x86_64-linux-ld
- Date
- 2019-09-07 04:13:36
- ID
- dd21dbfc-d125-11e9-9066-e374b0ba08e8
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Masahiro Nagano,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9178. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00_compile.t .............. ok
t/01_builder.t .............. ok
using Starman for test at t/02_server.t line 29.
2019/09/07-05:13:18 Starman::Server (type Net::Server::PreFork) starting! pid(17604)
Resolved [localhost]:37699 to [127.0.0.1]:37699, IPv4
Resolved [localhost]:37699 to [127.0.0.1]:37699, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:37699 with IPv4) - skipping
Binding to TCP port 37699 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:21 Server closing!
t/02_server.t ............... ok
using Starman for test at t/03_server_delayed_res.t line 29.
2019/09/07-05:13:21 Starman::Server (type Net::Server::PreFork) starting! pid(17614)
Resolved [localhost]:40301 to [127.0.0.1]:40301, IPv4
Resolved [localhost]:40301 to [127.0.0.1]:40301, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:40301 with IPv4) - skipping
Binding to TCP port 40301 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:24 Server closing!
using Starman for test at t/03_server_delayed_res.t line 89.
2019/09/07-05:13:24 Starman::Server (type Net::Server::PreFork) starting! pid(17623)
Resolved [localhost]:38917 to [127.0.0.1]:38917, IPv4
Resolved [localhost]:38917 to [127.0.0.1]:38917, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:38917 with IPv4) - skipping
Binding to TCP port 38917 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:27 Server closing!
t/03_server_delayed_res.t ... ok
using Starman for test at t/04_json.t line 31.
2019/09/07-05:13:27 Starman::Server (type Net::Server::PreFork) starting! pid(17633)
Resolved [localhost]:43217 to [127.0.0.1]:43217, IPv4
Resolved [localhost]:43217 to [127.0.0.1]:43217, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:43217 with IPv4) - skipping
Binding to TCP port 43217 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:30 Server closing!
t/04_json.t ................. ok
using Starman for test at t/05_counter.t line 31.
2019/09/07-05:13:31 Starman::Server (type Net::Server::PreFork) starting! pid(17643)
Resolved [localhost]:45383 to [127.0.0.1]:45383, IPv4
Resolved [localhost]:45383 to [127.0.0.1]:45383, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:45383 with IPv4) - skipping
Binding to TCP port 45383 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:31 Server closing!
t/05_counter.t .............. ok
using Starman for test at t/06_counter_delayed_res.t line 33.
2019/09/07-05:13:31 Starman::Server (type Net::Server::PreFork) starting! pid(17652)
Resolved [localhost]:41249 to [127.0.0.1]:41249, IPv4
Resolved [localhost]:41249 to [127.0.0.1]:41249, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:41249 with IPv4) - skipping
Binding to TCP port 41249 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:31 Server closing!
using Starman for test at t/06_counter_delayed_res.t line 95.
2019/09/07-05:13:31 Starman::Server (type Net::Server::PreFork) starting! pid(17660)
Resolved [localhost]:39081 to [127.0.0.1]:39081, IPv4
Resolved [localhost]:39081 to [127.0.0.1]:39081, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:39081 with IPv4) - skipping
Binding to TCP port 39081 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:31 Server closing!
t/06_counter_delayed_res.t .. ok
using Starman for test at t/07_skip_ps.t line 29.
2019/09/07-05:13:31 Starman::Server (type Net::Server::PreFork) starting! pid(17669)
Resolved [localhost]:42747 to [127.0.0.1]:42747, IPv4
Resolved [localhost]:42747 to [127.0.0.1]:42747, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:42747 with IPv4) - skipping
Binding to TCP port 42747 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:32 Server closing!
t/07_skip_ps.t .............. ok
2019/09/07-05:13:33 Starman::Server (type Net::Server::PreFork) starting! pid(17676)
Resolved [localhost]:44563 to [127.0.0.1]:44563, IPv4
Resolved [localhost]:44563 to [127.0.0.1]:44563, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:44563 with IPv4) - skipping
Binding to TCP port 44563 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/07-05:13:36 Server closing!
t/08_command.t .............. ok
All tests successful.
Files=9, Tests=86, 18 wallclock secs ( 0.04 usr 0.01 sys + 1.49 cusr 0.33 csys = 1.87 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
B 1.42_01 0
Capture::Tiny 0.48 0
Getopt::Long 2.39 2.38
JSON 4.02 2.53
LWP::UserAgent 6.39 0
Net::CIDR::Lite 0.21 0
Parallel::Scoreboard 0.08 0.03
Plack::Middleware 0 0
Pod::Usage 1.61 0
Starman 0.4015 0.3013
Test::More 1.302164 0
Test::SharedFork 0.35 0
Test::TCP 2.20 2.00
Try::Tiny 0.30 0.09
parent 0.225 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9178
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280231
ExtUtils::Command 7.36
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.36
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4229
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302164
Test::Harness 3.42
Test::More 1.302164
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/MOeSdV1GMO/Plack-Middleware-ServerStatus-Lite-0.36/blib/script:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/j1wR8YF3pB/Starman-0.4015/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/WQsQ_Bfv7z/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/j1wR8YF3pB/Starman-0.4015/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/j1wR8YF3pB/Starman-0.4015/blib/arch:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/MOeSdV1GMO/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/MOeSdV1GMO/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 3459
PERL5_CPANPLUS_IS_VERSION = 0.9178
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.18.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/WQsQ_Bfv7z
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/WQsQ_Bfv7z"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/WQsQ_Bfv7z
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.18.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 1) configuration:
Platform:
osname=linux, osvers=4.15.0-58-generic, archname=x86_64-linux-ld
uname='linux uchder 4.15.0-58-generic #64-ubuntu smp tue aug 6 11:12:41 utc 2019 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.18.1 -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='7.4.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.27.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.27'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.64
Built under linux
Compiled at Aug 13 2019 17:53:09
%ENV:
PERL5LIB="/home/cpan/pit/jail/WQsQ_Bfv7z/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/j1wR8YF3pB/Starman-0.4015/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/j1wR8YF3pB/Starman-0.4015/blib/arch:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/MOeSdV1GMO/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/MOeSdV1GMO/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="3459"
PERL5_CPANPLUS_IS_VERSION="0.9178"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.18.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/WQsQ_Bfv7z"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/WQsQ_Bfv7z""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/WQsQ_Bfv7z"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/WQsQ_Bfv7z/lib/perl5/5.18.1/x86_64-linux-ld
/home/cpan/pit/jail/WQsQ_Bfv7z/lib/perl5/5.18.1
/home/cpan/pit/jail/WQsQ_Bfv7z/lib/perl5/x86_64-linux-ld
/home/cpan/pit/jail/WQsQ_Bfv7z/lib/perl5
/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/j1wR8YF3pB/Starman-0.4015/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/j1wR8YF3pB/Starman-0.4015/blib/arch
/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/MOeSdV1GMO/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.18.1/.cpanplus/5.18.1/build/MOeSdV1GMO/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch
/home/cpan/pit/bare-ld/perl-5.18.1/lib/site_perl/5.18.1/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.18.1/lib/site_perl/5.18.1
/home/cpan/pit/bare-ld/perl-5.18.1/lib/5.18.1/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.18.1/lib/5.18.1
.