Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL SQL-Preproc-0.10 v5.10.0 NetBSD
Date: 2010-12-10T21:31:35Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear DARNOLD,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9010. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Dec 10 21:48:58 2010] cp Preproc/ExceptContainer.pm blib/lib/SQL/Preproc/ExceptContainer.pm
cp Preproc/Runtime.pm blib/lib/SQL/Preproc/Runtime.pm
cp Preproc.pod blib/lib/SQL/Preproc.pod
cp Preproc/Exception.pm blib/lib/SQL/Preproc/Exception.pm
cp Preproc.pm blib/lib/SQL/Preproc.pm
cp Preproc/Teradata.pm blib/lib/SQL/Preproc/Teradata.pm
Manifying blib/man3/SQL::Preproc.3
[ERROR] [Fri Dec 10 21:48:59 2010] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0 /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0 .) at (eval 4) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at t/01connect.t line 35
t/01connect.t ....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 6/7 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0 /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0 .) at (eval 4) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at t/02createtbl.t line 35
t/02createtbl.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 14/15 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0 /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0 .) at (eval 4) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at t/03loadtbl.t line 37
t/03loadtbl.t ....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 9/10 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0 /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0 .) at (eval 4) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at t/04select.t line 36
t/04select.t .....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 7/8 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0 /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0 .) at (eval 4) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at t/05cursor.t line 36
t/05cursor.t .....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 16/17 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0 /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0 .) at (eval 4) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at t/06excepts.t line 38
t/06excepts.t ....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 12/13 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/5.10.0 /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0 .) at (eval 4) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at t/07multiconn.t line 36
t/07multiconn.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 10/11 subtests
t/08subclass.t ... skipped: no DBIx::Chart
t/09updcursor.t .. skipped: no DBD::Teradata
t/10sem.t ........ skipped: no DBD::Teradata
Test Summary Report
-------------------
t/01connect.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 7 tests but ran 2.
t/02createtbl.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 15 tests but ran 2.
t/03loadtbl.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 10 tests but ran 2.
t/04select.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 8 tests but ran 2.
t/05cursor.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 17 tests but ran 2.
t/06excepts.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 13 tests but ran 2.
t/07multiconn.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 11 tests but ran 2.
Files=10, Tests=14, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.43 cusr 0.05 csys = 0.52 CPU)
Result: FAIL
Failed 7/10 test programs. 7/14 subtests failed.
*** Error code 255
Stop.
make: stopped in /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10
[MSG] [Fri Dec 10 21:48:59 2010] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
DBD::CSV
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'DARNOLD (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'DBD::CSV' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
DBI 1.615 0
Filter::Simple 0.82 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9010
CPANPLUS::Dist::Build 0.50
Cwd 3.33
ExtUtils::CBuilder 0.2801
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3607
Test::Harness 3.22
Test::More 0.96
version 0.87
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.58.
Powered by minismokebox version 0.40
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 25768
PERL5_CPANPLUS_IS_VERSION = 0.9010
PERL5_MINISMOKEBOX = 0.40
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.10.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.10.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=netbsd, osvers=5.1_rc3, archname=amd64-netbsd
uname='netbsd fubar.bingosnet.co.uk 5.1_rc3 netbsd 5.1_rc3 (generic) #0: sat jun 12 20:26:01 utc 2010 builds@b8.netbsd.org:homebuildsabnetbsd-5-1-rc3amd64201006130031z-objhomebuildsabnetbsd-5-1-rc3srcsysarchamd64compilegeneric amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.10.0 -Dusemallocwrap=y -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='4.1.3 20080704 prerelease (NetBSD nb2 20081120)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lm -lcrypt -lutil -lc -lposix
perllibs=-lm -lcrypt -lutil -lc -lposix
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
Built under netbsd
Compiled at Sep 14 2010 22:19:49
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="25768"
PERL5_CPANPLUS_IS_VERSION="0.9010"
PERL5_MINISMOKEBOX="0.40"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.10.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/lib
/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/DBI-1.615/blib/arch
/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/lib
/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/SQL-Preproc-0.10/blib/arch
/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/amd64-netbsd
/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0
/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/amd64-netbsd
/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0
.