Inline-C v0.79_001 Perl 5 v5.14.2 amd64-netbsd

Status
Fail
From
Chris Williams (BINGOS)
Dist
Inline-C v0.79_001
Platform
Perl 5 v5.14.2 amd64-netbsd
Date
2019-01-23 06:41:16
ID
e22a6b40-1ed9-11e9-86e3-404589cf513b
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear TINITA,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9176. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.14.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t ................ ok
t/01syntax.t ........................... ok
t/02config.t ........................... ok
t/03typemap.t .......................... ok
t/04perlapi.t .......................... ok
t/05xsmode.t ........................... ok
t/06parseregexp.t ...................... ok
t/07typemap_multi.t .................... ok
t/08taint.t ............................ ok
This test could take a couple of minutes to run
t/09parser.t ........................... ok
t/10callback.t ......................... ok
t/11default_readonly.t ................. ok
t/14void_arg.t ......................... ok
t/14void_arg_PRD.t ..................... ok
t/15ccflags.t .......................... ok
t/16ccflagsex.t ........................ ok
t/17prehead.t .......................... ok
t/18quote_space.t ...................... ok
t/19INC.t .............................. ok
t/20eval.t ............................. ok
t/21read_DATA.t ........................ ok
t/22read_DATA_2.t ...................... ok
t/23validate.t ......................... ok
t/24prefix.t ........................... ok
t/25proto.t ............................ ok
t/26fork.t ............................. ok
t/27inline_maker.t ..................... ok
t/28autowrap.t ......................... ok
t/30cppflags.t ......................... ok
t/31include_dirs_angle_brackets.t ...... ok

Expected:
[[[ BEGIN EXPECTED ERRORS ]]]
PURPOSEFUL COMPILER ERROR!
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
"make > out.make 2>&1" with error code 2
[[[ END EXPECTED ERRORS ]]]

Got:
[[[ BEGIN RECEIVED ERRORS ]]]
Running Mkbootstrap for eval_8_8023 ()
chmod 644 "eval_8_8023.bs"
"/home/cpan/pit/bare/perl-5.14.2/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- eval_8_8023.bs blib/arch/auto/eval_8_8023/eval_8_8023.bs 644
"/home/cpan/pit/bare/perl-5.14.2/bin/perl" "/home/cpan/pit/bare/perl-5.14.2/lib/site_perl/5.14.2/ExtUtils/xsubpp"  -typemap "/home/cpan/pit/bare/perl-5.14.2/lib/5.14.2/ExtUtils/typemap" -typemap "/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/t/typemap"  eval_8_8023.xs > eval_8_8023.xsc
mv eval_8_8023.xsc eval_8_8023.c
cc -c  -iquote"/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/t"  -fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include -O    -DVERSION=\"0.00\"  -DXS_VERSION=\"0.00\" -DPIC -fPIC "-I/home/cpan/pit/bare/perl-5.14.2/lib/5.14.2/amd64-netbsd/CORE"   eval_8_8023.c
In file included from eval_8_8023.xs:5:0:
/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/t/stdio.h:1:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'COMPILER'
*** Error code 1

Stop.
make: stopped in /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/_Inline_32include_dirs_double_quotes_bad.27467/build/eval_8_8023

A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
  "make > out.make 2>&1" with error code 1

The build directory was:
/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/_Inline_32include_dirs_double_quotes_bad.27467/build/eval_8_8023

To debug the problem, cd to the build directory, and inspect the output files.

Environment MAKEFLAGS = ''
Environment PATH = '/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin'
 at (eval 8) line 10.
	...propagated at /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/blib/lib/Inline/C.pm line 882.
BEGIN failed--compilation aborted at (eval 8) line 13.

[[[ END RECEIVED ERRORS ]]]
t/32include_dirs_double_quotes_bad.t ... 
Failed 1/1 subtests 
t/33include_dirs_double_quotes_good.t .. ok
t/author-pod-syntax.t .................. skipped: these tests are for testing by the author
t/parse-pegex.t ........................ ok
t/pegex-parser.t ....................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set

Test Summary Report
-------------------
t/32include_dirs_double_quotes_bad.t (Wstat: 0 Tests: 1 Failed: 1)
  Failed test:  1
t/parse-pegex.t                      (Wstat: 0 Tests: 24 Failed: 0)
  TODO passed:   4, 7-9
Files=35, Tests=157, 54 wallclock secs ( 0.11 usr  0.05 sys + 39.73 cusr  9.86 csys = 49.75 CPU)
Result: FAIL
Failed 1/35 test programs. 1/157 subtests failed.
*** Error code 255

Stop.
make: stopped in /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001


PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  ExtUtils::MakeMaker                7.34     7.00
	  File::Copy::Recursive              0.38        0
	  File::Path                         2.16        0
	  File::Spec                         3.75      0.8
	  Inline                             0.80     0.79
	  Parse::RecDescent              1.967015 1.967009
	  Pegex                              0.70     0.58
	  Test::More                     1.302141     0.88
	  Test::Warn                         0.36     0.23
	  YAML::XS                           0.76        0
	  autodie                          2.1001        0
	  version                          0.9924     0.77

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9176
	CPANPLUS::Dist::Build              0.90
	Cwd                                3.75
	ExtUtils::CBuilder             0.280230
	ExtUtils::Command                  7.34
	ExtUtils::Install                  2.14
	ExtUtils::MakeMaker                7.34
	ExtUtils::Manifest                 1.71
	ExtUtils::ParseXS                  3.35
	File::Spec                         3.75
	Module::Build                    0.4224
	Pod::Parser                        1.37
	Pod::Simple                        3.16
	Test2                          1.302141
	Test::Harness                      3.42
	Test::More                     1.302141
	version                          0.9924

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.06.
Powered by minismokebox version 0.68

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    NONINTERACTIVE_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = /home/cpan/pit/jail/0Om95ZBaGl/lib/perl5:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/blib/lib:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 18528
    PERL5_CPANPLUS_IS_VERSION = 0.9176
    PERL5_MINISMOKEBOX = 0.68
    PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.14.2
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/0Om95ZBaGl
    PERL_MB_OPT = --install_base "/home/cpan/pit/jail/0Om95ZBaGl"
    PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/0Om95ZBaGl
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/pit/bare/perl-5.14.2/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
   
  Platform:
    osname=netbsd, osvers=6.1.4, archname=amd64-netbsd
    uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 '
    config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.14.2'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
    ccversion='', gccversion='4.5.3', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lgdbm -lm -lcrypt -lutil -lc -lposix
    perllibs=-lm -lcrypt -lutil -lc -lposix
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  -L/usr/pkg/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
                        PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
                        USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
  Built under netbsd
  Compiled at May  9 2014 14:56:56
  %ENV:
    PERL5LIB="/home/cpan/pit/jail/0Om95ZBaGl/lib/perl5:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/blib/lib:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="18528"
    PERL5_CPANPLUS_IS_VERSION="0.9176"
    PERL5_MINISMOKEBOX="0.68"
    PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.14.2"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/0Om95ZBaGl"
    PERL_MB_OPT="--install_base "/home/cpan/pit/jail/0Om95ZBaGl""
    PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/0Om95ZBaGl"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/cpan/pit/jail/0Om95ZBaGl/lib/perl5/5.14.2/amd64-netbsd
    /home/cpan/pit/jail/0Om95ZBaGl/lib/perl5/5.14.2
    /home/cpan/pit/jail/0Om95ZBaGl/lib/perl5/amd64-netbsd
    /home/cpan/pit/jail/0Om95ZBaGl/lib/perl5
    /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/blib/lib
    /home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/UsGwLZ0S6S/Inline-C-0.79_001/blib/arch
    /home/cpan/pit/bare/perl-5.14.2/lib/site_perl/5.14.2/amd64-netbsd
    /home/cpan/pit/bare/perl-5.14.2/lib/site_perl/5.14.2
    /home/cpan/pit/bare/perl-5.14.2/lib/5.14.2/amd64-netbsd
    /home/cpan/pit/bare/perl-5.14.2/lib/5.14.2
    .