Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL AnyEvent-SIP-0.002 v5.16.2 OpenBSD
Date: 2013-04-12T17:03:27Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear XSAWYERX,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9134. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00-compile.t .......................... ok
# call created
# got ringing
# call established
# call cleaned up
t/02_listen_and_invite-anyevent.t ....... ok
# call created
# got ringing
# call established
# call cleaned up
t/02_listen_and_invite.t ................ ok
t/03_forward_stateless.t ................ ok
# UAS on 127.0.0.1:35576
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 100/100 packets
t/04_call_with_rtp.t .................... ok
# UAS on 127.0.0.1:15690
# UAC on 127.0.0.1:48409
# PROXY on 127.0.0.1:41828 127.0.0.1:8167
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:41828 REQ(INVITE) SDP: audio=127.0.0.1:2672/2
# I< 127.0.0.1:41828 RSP(INVITE,100) NO SDP
# <<
# proxy >> I< 127.0.0.1:48409 REQ(INVITE) SDP: audio=127.0.0.1:2672/2
# O> udp:127.0.0.1:15690 REQ(INVITE) SDP: audio=127.0.0.1:2672/2
# I< 127.0.0.1:15690 RSP(INVITE,100) NO SDP
# O> 127.0.0.1:48409 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:15690 RSP(INVITE,200) SDP: audio=127.0.0.1:11946/2
# O> 127.0.0.1:48409 RSP(INVITE,200) SDP: audio=127.0.0.1:11946/2
# I< 127.0.0.1:48409 REQ(ACK) NO SDP
# O> udp:127.0.0.1:15690 REQ(ACK) NO SDP
# <<
# uas >> I< 127.0.0.1:8167 REQ(INVITE) SDP: audio=127.0.0.1:2672/2
# O> 127.0.0.1:8167 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:8167;branch=z9hG4bKd33c64c28ec34f125635a1fc6b0757be75a1155b1de2f93f3409286b8b5d8c29
# Record-route: <sip:127.0.0.1:8167;lr>
# Via: SIP/2.0/UDP 127.0.0.1:41828;branch=z9hG4bK89c0c78a46a2f9df09bc8ead5a31251475a1155b1de2f93f3409286b8b5d8c29
# Record-route: <sip:127.0.0.1:41828;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:48409;branch=z9hG4bKbbcd1987c7566ab33f6dbb2473f2f03e75a1155b1de2f93f3409286b8b5d8c29
# Call-id: 330f651bcac8915e81e1d892c4664525
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=3cae11d4b7a05f8f6b3b92a57d071ffe
# Content-type: application/sdp
# Content-length: 171
# Max-forwards: 69
# Contact: sip:r0b574c42555b2653015448551c05485002555b03550d7e78347b7037@127.0.0.1:8167
# To: you.uas@example.com;tag=724c62ae1d594803293fd608e110ee7b
#
# v=0
# o=anonymous 1365786156 1365786156 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 2672 RTP/AVP 0
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# O> 127.0.0.1:8167 RSP(INVITE,200) SDP: audio=127.0.0.1:11946/2
# I< 127.0.0.1:8167 REQ(ACK) NO SDP
# call established
# <<
# uac >> I< 127.0.0.1:41828 RSP(INVITE,200) SDP: audio=127.0.0.1:11946/2
# O> 127.0.0.1:41828 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> I< 127.0.0.1:8167 REQ(BYE) NO SDP
# O> 127.0.0.1:8167 RSP(BYE,200) NO SDP
# call cleaned up
# <<
# uas >> received 100/100 packets
# <<
# uas >> RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:41828 REQ(BYE) NO SDP
# I< 127.0.0.1:41828 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:41828 REQ(INVITE) SDP: audio=127.0.0.1:4804/2
# I< 127.0.0.1:41828 RSP(INVITE,100) NO SDP
# <<
# proxy >> I< 127.0.0.1:48409 REQ(INVITE) SDP: audio=127.0.0.1:4804/2
# O> udp:127.0.0.1:15690 REQ(INVITE) SDP: audio=127.0.0.1:10142/2
# I< 127.0.0.1:15690 RSP(INVITE,100) NO SDP
# O> 127.0.0.1:48409 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:15690 RSP(INVITE,200) SDP: audio=127.0.0.1:3662/2
# O> 127.0.0.1:48409 RSP(INVITE,200) SDP: audio=127.0.0.1:11868/2
# I< 127.0.0.1:48409 REQ(ACK) NO SDP
# O> udp:127.0.0.1:15690 REQ(ACK) NO SDP
# <<
# uas >> I< 127.0.0.1:8167 REQ(INVITE) SDP: audio=127.0.0.1:10142/2
# O> 127.0.0.1:8167 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:8167;branch=z9hG4bKd33c64c28ec34f125635a1fc6b0757bebd1699b08e0497abec73e7d3fae9c7ec
# Record-route: <sip:127.0.0.1:8167;lr>
# Via: SIP/2.0/UDP 127.0.0.1:41828;branch=z9hG4bK89c0c78a46a2f9df09bc8ead5a312514bd1699b08e0497abec73e7d3fae9c7ec
# Record-route: <sip:127.0.0.1:41828;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:48409;branch=z9hG4bKbbcd1987c7566ab33f6dbb2473f2f03ebd1699b08e0497abec73e7d3fae9c7ec
# Call-id: bf181c09c3d9f5458ae9d44d5308f3e0
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=52cb404713f889998c450178729d9d0d
# Content-type: application/sdp
# Max-forwards: 69
# Contact: sip:r0b574c42555b2653015448551c05485002555b03550d7e78347b7037@127.0.0.1:8167
# Content-length: 172
# To: you.uas@example.com;tag=33f8874e34f88795ef2adc1d2803ffbb
#
# v=0
# o=anonymous 1365786159 1365786159 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 10142 RTP/AVP 0
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# O> 127.0.0.1:8167 RSP(INVITE,200) SDP: audio=127.0.0.1:3662/2
# I< 127.0.0.1:8167 REQ(ACK) NO SDP
# call established
# <<
# uac >> I< 127.0.0.1:41828 RSP(INVITE,200) SDP: audio=127.0.0.1:11868/2
# O> 127.0.0.1:41828 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> I< 127.0.0.1:8167 REQ(BYE) NO SDP
# O> 127.0.0.1:8167 RSP(BYE,200) NO SDP
# call cleaned up
# <<
# uas >> received 100/100 packets
# <<
# uas >> RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:41828 REQ(BYE) NO SDP
# I< 127.0.0.1:41828 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
# nathelper >> OK
# <<
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:41828 REQ(INVITE) SDP: audio=127.0.0.1:5472/2
# <<
# proxy >> I< 127.0.0.1:48409 REQ(INVITE) SDP: audio=127.0.0.1:5472/2
# O> udp:127.0.0.1:15690 REQ(INVITE) SDP: audio=127.0.0.1:7922/2
# <<
# uas >> I< 127.0.0.1:8167 REQ(INVITE) SDP: audio=127.0.0.1:7922/2
# O> 127.0.0.1:8167 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:8167;branch=z9hG4bKd33c64c28ec34f125635a1fc6b0757bedcbb1c919a6c20917ba371337ad31a76
# Record-route: <sip:127.0.0.1:8167;lr>
# Via: SIP/2.0/UDP 127.0.0.1:41828;branch=z9hG4bK89c0c78a46a2f9df09bc8ead5a312514dcbb1c919a6c20917ba371337ad31a76
# Record-route: <sip:127.0.0.1:41828;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:48409;branch=z9hG4bKbbcd1987c7566ab33f6dbb2473f2f03edcbb1c919a6c20917ba371337ad31a76
# Call-id: bb8f860ff63ce09e0d068caaf16b9685
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=8cc7dd4a8d192ea819a1a90287ef8760
# Content-type: application/sdp
# Content-length: 171
# Max-forwards: 69
# Contact: sip:r0b574c42555b2653015448551c05485002555b03550d7e78347b7037@127.0.0.1:8167
# To: you.uas@example.com;tag=67eddf53e28162b7cf16007414e3cea6
#
# v=0
# o=anonymous 1365786161 1365786161 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 7922 RTP/AVP 0
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# O> 127.0.0.1:8167 RSP(INVITE,200) SDP: audio=127.0.0.1:10424/2
# <<
# uac >> I< 127.0.0.1:41828 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:41828 RSP(INVITE,200) SDP: audio=127.0.0.1:4220/2
# O> 127.0.0.1:41828 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> I< 127.0.0.1:8167 REQ(ACK) NO SDP
# call established
# I< 127.0.0.1:8167 REQ(BYE) NO SDP
# O> 127.0.0.1:8167 RSP(BYE,200) NO SDP
# call cleaned up
# <<
# uas >> received 100/100 packets
# <<
# uas >> RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:41828 REQ(BYE) NO SDP
# I< 127.0.0.1:41828 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
t/05_call_with_stateless_proxy.t ........ ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# Start RTP
# <<
# uas >> Call accepted
# <<
# uac >> RTP#50#
# <<
# uas >> got rtp packet#50
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Start RTP
# <<
# uas >> RTP#50#
# <<
# uac >> got rtp packet#50
# Send BYE
# <<
# uas >> Got RTP
# <<
# uas >> Received BYE
# <<
# uac >> BYE done
# <<
t/06_call_with_reinvite.t ............... ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# <<
# uas >> got rtp packet#50
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Start RTP
# <<
# uas >> RTP#50#
# <<
# uac >> got rtp packet#50
# <<
# uac >> Send BYE
# <<
# uas >> Received BYE after 0 bytes read
# <<
# uac >> BYE done
# <<
t/07_call_on_hold.t ..................... ok
# registrar >> OK
# <<
# registrar >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# uac >> Registered 007 (REALM.example.com)
# <<
# uac >> Registered noauth ()
# <<
t/08_register_with_auth.t ............... ok
t/11_invite_timeout.t ................... ok
# call established
# call cleaned up
t/12_maddr.t ............................ ok
t/13_maddr_proxy.t ...................... ok
# UAS on 127.0.0.1:5062
# UAC on 127.0.0.1:5060
# PROXY on 127.0.0.1:5063
# proxy >> OK
# <<
# proxy >> Listening
# <<
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Send BYE
# <<
# Failed test '[uac] Received BYE'
# at ./t/testlib.pl line 156.
# Failed test 'fatal error at ./t/testlib.pl line 157.
# '
# at ./t/testlib.pl line 26.
# Looks like you failed 2 tests of 12.
# Looks like your test exited with 1 just after 12.
t/14_bugfix_0.51.t ......................
Dubious, test returned 1 (wstat 256, 0x100)
Failed 2/12 subtests
t/15_block_invite.t ..................... ok
t/16_drop_invite.t ...................... ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Starting ReInvite
# <<
# uas >> ReInvite accepted
# <<
# uac >> ReInvite done
# <<
# uac >> Send BYE
# <<
# uas >> Received BYE
# <<
# uac >> BYE done
# <<
t/17_call_with_reinvite_and_auth.t ...... ok
# registrar >> OK
# <<
# registrar >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uac >> got 401 response
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# uac >> Registered 007 (REALM.example.com)
# <<
# uac >> Registered noauth ()
# <<
t/18_register_with_auth_step_by_step.t .. ok
# UAS on 127.0.0.1:6993
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 353/100 packets events=1 2 D # 3 4 B *
t/19_call_with_dtmf.t ................... ok
# call created
# got ringing
# call established
# call cleaned up
t/anyevent.t ............................ ok
t/release-pod-syntax.t .................. skipped: these tests are for release candidate testing
Test Summary Report
-------------------
t/14_bugfix_0.51.t (Wstat: 256 Tests: 12 Failed: 2)
Failed tests: 11-12
Non-zero exit status: 1
Files=20, Tests=224, 58 wallclock secs ( 0.09 usr 0.10 sys + 5.11 cusr 8.84 csys = 14.14 CPU)
Result: FAIL
Failed 1/20 test programs. 2/224 subtests failed.
BEGIN failed--compilation aborted at -e line 1.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
AnyEvent 7.04 0
AnyEvent::AggressiveIdle 0.04 0
Cwd 3.40 0
Data::Dumper 2.135_06 0
Digest::MD5 2.51 0
File::Find 1.20 0
File::Temp 0.23 0
IO::Socket 1.34 0
List::Util 1.25 0
Module::Build 0.4003 0.3601
Net::SIP 0.68 0
Net::SIP::Blocker 0 0
Net::SIP::Debug 0 0
Net::SIP::Dispatcher::Eventloop 0 0
Net::SIP::Dropper 0 0
Net::SIP::Dropper::ByField 0 0
Net::SIP::Dropper::ByIPPort 0 0
Net::SIP::Leg 0 0
Net::SIP::NATHelper::Client 0 0
Net::SIP::NATHelper::Local 0 0
Net::SIP::NATHelper::Server 0 0
Net::SIP::ReceiveChain 0 0
Net::SIP::SDP 0 0
Net::SIP::Util 0 0
Test::More 0.98 0
base 2.18 0
fields 2.16 0
strict 1.07 0
warnings 1.13 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9134
CPANPLUS::Dist::Build 0.70
Cwd 3.40
ExtUtils::CBuilder 0.280206
ExtUtils::Command 1.17
ExtUtils::Install 1.58
ExtUtils::MakeMaker 6.64
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.18
File::Spec 3.40
Module::Build 0.4003
Pod::Parser 1.51
Pod::Simple 3.20
Test::Harness 3.26
Test::More 0.98
version 0.9902
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.86.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-7.04/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-7.04/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-AggressiveIdle-0.04/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-AggressiveIdle-0.04/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Digest-HMAC-1.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Digest-HMAC-1.03/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-DNS-0.72/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-DNS-0.72/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-SIP-0.68/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-SIP-0.68/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-SIP-0.002/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-SIP-0.002/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 22340
PERL5_CPANPLUS_IS_VERSION = 0.9134
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.16.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.16.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 16 subversion 2) configuration:
Platform:
osname=openbsd, osvers=5.1, archname=OpenBSD.amd64-openbsd
uname='openbsd oliphant.bingosnet.co.uk 5.1 generic#181 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.16.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.1'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.62.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MYMALLOC PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF
Built under openbsd
Compiled at Nov 5 2012 14:38:43
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-7.04/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-7.04/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-AggressiveIdle-0.04/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-AggressiveIdle-0.04/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Digest-HMAC-1.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Digest-HMAC-1.03/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-DNS-0.72/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-DNS-0.72/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-SIP-0.68/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-SIP-0.68/blib/arch:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-SIP-0.002/blib/lib:/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-SIP-0.002/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="22340"
PERL5_CPANPLUS_IS_VERSION="0.9134"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.16.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-7.04/blib/lib
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-7.04/blib/arch
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-AggressiveIdle-0.04/blib/lib
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-AggressiveIdle-0.04/blib/arch
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Digest-HMAC-1.03/blib/lib
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Digest-HMAC-1.03/blib/arch
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-DNS-0.72/blib/lib
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-DNS-0.72/blib/arch
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-SIP-0.68/blib/lib
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/Net-SIP-0.68/blib/arch
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-SIP-0.002/blib/lib
/home/cpan/pit/bare/conf/perl-5.16.2/.cpanplus/5.16.2/build/AnyEvent-SIP-0.002/blib/arch
/home/cpan/pit/bare/perl-5.16.2/lib/site_perl/5.16.2/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.16.2/lib/site_perl/5.16.2
/home/cpan/pit/bare/perl-5.16.2/lib/5.16.2/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.16.2/lib/5.16.2
.