AntDen v0.0.1 Perl 5 v5.28.1 x86_64-linux
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
AntDen v0.0.1
- Platform
- Perl 5 v5.28.1 x86_64-linux
- Date
- 2020-07-10 03:17:35
- ID
- e6704b08-c25b-11ea-9066-e374b0ba08e8
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear LIJINFENG,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'fetch':
No tests defined for AntDen extension.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.44 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.44
ExtUtils::Install 2.16
ExtUtils::MakeMaker 7.44
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.39
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302175
Test::Harness 3.42
Test::More 1.302175
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/jail/X_mUBNk1Bv/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/X_mUBNk1Bv/lib/perl5:/home/cpan/pit/bare/conf/perl-5.28.1/.cpanplus/5.28.1/build/1LjZcFLq6U/AntDen-0.0.1/blib/lib:/home/cpan/pit/bare/conf/perl-5.28.1/.cpanplus/5.28.1/build/1LjZcFLq6U/AntDen-0.0.1/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 13433
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.28.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/X_mUBNk1Bv
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/X_mUBNk1Bv"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/X_mUBNk1Bv
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.28.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 28 subversion 1) configuration:
Platform:
osname=linux
osvers=5.4.12-1-lts
archname=x86_64-linux
uname='linux august 5.4.12-1-lts #2-alpine smp thu, 16 jan 2020 12:53:54 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.28.1'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong'
ccversion=''
gccversion='9.2.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/include/fortify /usr/lib /usr/local/lib /lib/../lib /usr/lib/../lib /lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=/usr/lib/libc.a
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.82
Built under linux
Compiled at Jan 29 2020 01:22:18
%ENV:
PERL5LIB="/home/cpan/pit/jail/X_mUBNk1Bv/lib/perl5:/home/cpan/pit/bare/conf/perl-5.28.1/.cpanplus/5.28.1/build/1LjZcFLq6U/AntDen-0.0.1/blib/lib:/home/cpan/pit/bare/conf/perl-5.28.1/.cpanplus/5.28.1/build/1LjZcFLq6U/AntDen-0.0.1/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="13433"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.28.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/X_mUBNk1Bv"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/X_mUBNk1Bv""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/X_mUBNk1Bv"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/X_mUBNk1Bv/lib/perl5/5.28.1/x86_64-linux
/home/cpan/pit/jail/X_mUBNk1Bv/lib/perl5/5.28.1
/home/cpan/pit/jail/X_mUBNk1Bv/lib/perl5/x86_64-linux
/home/cpan/pit/jail/X_mUBNk1Bv/lib/perl5
/home/cpan/pit/bare/conf/perl-5.28.1/.cpanplus/5.28.1/build/1LjZcFLq6U/AntDen-0.0.1/blib/lib
/home/cpan/pit/bare/conf/perl-5.28.1/.cpanplus/5.28.1/build/1LjZcFLq6U/AntDen-0.0.1/blib/arch
/home/cpan/pit/bare/perl-5.28.1/lib/site_perl/5.28.1/x86_64-linux
/home/cpan/pit/bare/perl-5.28.1/lib/site_perl/5.28.1
/home/cpan/pit/bare/perl-5.28.1/lib/5.28.1/x86_64-linux
/home/cpan/pit/bare/perl-5.28.1/lib/5.28.1