ExtUtils-F77 v1.26 Perl 5 v5.12.5 i386-freebsd-64int
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
ExtUtils-F77 v1.26
- Platform
- Perl 5 v5.12.5 i386-freebsd-64int
- Date
- 2023-01-08 18:54:46
- ID
- ebdf8f82-8f85-11ed-aba6-9a79f339625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Ed J,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/64bit/perl-5.12.5/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
ExtUtils::F77: Using system=Freebsd compiler=GFortran
Can't exec "gfortran": No such file or directory at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 107.
Use of uninitialized value $dir in scalar chomp at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 108.
Can't exec "gfortran": No such file or directory at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 107.
Use of uninitialized value $dir in scalar chomp at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 108.
Runtime: "-L/usr/local/lib" -L/usr/lib -lgfortran -lm
ExtUtils::F77: Validating "-L/usr/local/lib" -L/usr/lib -lgfortran -lm at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 14.
ExtUtils::F77: Unable to find library -lgfortran at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 14.
ExtUtils::F77: Unable to guess and/or validate system/compiler configuration
ExtUtils::F77: Will try system=Freebsd Compiler=G77
Can't exec "g77-34": No such file or directory at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 107.
Use of uninitialized value $dir in scalar chomp at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 108.
Can't exec "g77-34": No such file or directory at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 107.
Use of uninitialized value $dir in scalar chomp at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 108.
ExtUtils::F77: Validating "-L/usr/local/lib" -L/usr/lib -lg2c -lm at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 14.
ExtUtils::F77: Unable to find library -lg2c at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 14.
ExtUtils::F77: Well that didn't appear to validate. Well I will try it anyway.
ExtUtils::F77: Compiler: g77-34
ExtUtils::F77: Cflags: -O2
Compiling the test Fortran program...
Command: g77-34 -O2 /tmp/testf7727210.f -o /tmp/testf7727210_exe at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 14.
Can't exec "g77-34": No such file or directory at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 576.
Executing the test program...
Can't exec "/tmp/testf7727210_exe": No such file or directory at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 578.
Use of uninitialized value in string ne at /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib/ExtUtils/F77.pm line 578.
Test of Fortran Compiler FAILED.
Do not know how to compile Fortran on your system
# Failed test 'testcompiler method returns 1'
# at t/require.t line 11.
# got: '0'
# expected: '1'
# Failed test 'runtime libs found'
# at t/require.t line 13.
# got: '0'
# expected: '1'
# Method: runtime, "-L/usr/local/lib" -L/usr/lib -lg2c -lm
# Method: trail_, 1
# Method: compiler, g77-34
# Method: cflags, -O2
# Compiler:
# Looks like you failed 2 tests of 3.
t/require.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/3 subtests
Test Summary Report
-------------------
t/require.t (Wstat: 512 (exited 2) Tests: 3 Failed: 2)
Failed tests: 2-3
Non-zero exit status: 2
Files=1, Tests=3, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.17 cusr 0.12 csys = 0.34 CPU)
Result: FAIL
Failed 1/1 test programs. 2/3 subtests failed.
*** Error code 2
Stop.
make: stopped in /usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.64 0
File::Which 1.27 0
List::Util 1.22 0
Text::ParseWords 3.27 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.37
Pod::Simple 3.14
Test2 1.302191
Test::Harness 3.44
Test::More 1.302191
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/0iXPrE7RRO/lib/perl5:/usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 91796
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/64bit/conf/perl-5.12.5
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/0iXPrE7RRO
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/0iXPrE7RRO"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/0iXPrE7RRO
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/64bit/perl-5.12.5/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 5) configuration:
Platform:
osname=freebsd, osvers=13.1-release-p2, archname=i386-freebsd-64int
uname='freebsd fiat 13.1-release-p2 freebsd 13.1-release-p2 generic i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/64bit/perl-5.12.5 -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='FreeBSD Clang 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Oct 12 2022 15:54:12
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/0iXPrE7RRO/lib/perl5:/usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="91796"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/64bit/conf/perl-5.12.5"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/0iXPrE7RRO"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/0iXPrE7RRO""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/0iXPrE7RRO"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/0iXPrE7RRO/lib/perl5/5.12.5/i386-freebsd-64int
/usr/home/cpan/pit/jail/0iXPrE7RRO/lib/perl5/5.12.5
/usr/home/cpan/pit/jail/0iXPrE7RRO/lib/perl5/i386-freebsd-64int
/usr/home/cpan/pit/jail/0iXPrE7RRO/lib/perl5
/usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/lib
/usr/home/cpan/pit/64bit/conf/perl-5.12.5/.cpanplus/5.12.5/build/sxjg3e3KJv/ExtUtils-F77-1.26/blib/arch
/usr/home/cpan/pit/64bit/perl-5.12.5/lib/site_perl/5.12.5/i386-freebsd-64int
/usr/home/cpan/pit/64bit/perl-5.12.5/lib/site_perl/5.12.5
/usr/home/cpan/pit/64bit/perl-5.12.5/lib/5.12.5/i386-freebsd-64int
/usr/home/cpan/pit/64bit/perl-5.12.5/lib/5.12.5
.