Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS Math-LongDouble-0.17 v5.14.3 FreeBSD
Date: 2016-02-02T11:13:02Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SISYPHUS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9156. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
Running Mkbootstrap for Math::LongDouble ()
chmod 644 "LongDouble.bs"
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/bare/perl-5.14.3/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
No tests with this file. Instead, mainly for the benefit
of the author, we (hopefully) see some diagnostics from some
test executables that were run during the Makefile.PL stage.
t/01config_xtra.t .......... ok
CC = cc
OPTMIZE = -O
erfl & isnanl check (build): try.in:14:8: warning: implicit declaration of function 'isnanl' is invalid in C99 [-Wimplicit-function-declaration]
ret = isnanl(op);
^
1 warning generated.
/tmp/try-500c66.o: In function `main':
try.in:(.text+0x2d): undefined reference to `isnanl'
cc: error: linker command failed with exit code 1 (use -v to see invocation)
build output (nanl check):
execution output (nanl check): rop set as expected
build output (nan**0 check):
/tmp/try2-f07ffd.o: In function `main':
try2.in:(.text+0x4c): warning: powl has lower than advertised precision
nan**0 check diagnostic: 1.0L
build output (signbitl check): try4.in:13:8: warning: implicit declaration of function 'signbitl' is invalid in C99 [-Wimplicit-function-declaration]
ret = signbitl(op);
^
1 warning generated.
/tmp/try4-358302.o: In function `main':
try4.in:(.text+0x19): undefined reference to `signbitl'
cc: error: linker command failed with exit code 1 (use -v to see invocation)
build output (sincosl check): try5.in:18:2: warning: implicit declaration of function 'sincosl' is invalid in C99 [-Wimplicit-function-declaration]
sincosl(op, &sine, &cosine);
^
1 warning generated.
/tmp/try5-faad10.o: In function `main':
try5.in:(.text+0x21): undefined reference to `sincosl'
cc: error: linker command failed with exit code 1 (use -v to see invocation)
NAN_POW_BUG is NOT defined
t/aab_basic.t .............. ok
NANL_IS_UNAVAILABLE is NOT defined
ISNANL_IS_UNAVAILABLE is defined
SIGNBITL_IS_UNAVAILABLE is defined
SINCOSL_IS_UNAVAILABLE is defined
Math::LongDouble::_have_isnanl() returns 0
t/abs.t .................... ok
Math::LongDouble::_have_nanl() returns 1
Math::LongDouble::_have_signbitl() returns 0
t/arith.t .................. ok
t/base_conversion.t ........ ok
t/bool.t ................... ok
t/cmp.t .................... ok
LD_DBL_DENORM_MIN not implemented
t/constants.t .............. ok
LD_LDBL_DENORM_MIN not implemented
t/inc_dec.t ................ ok
Ignoring that ceill(-0.6257) returned '0' instead of '-0'
t/int.t .................... ok
t/log_exp.t ................ ok
Math:LongDouble::_nan_pow_bug() returns 0
t/nan_pow.t ................ ok
t/new.t .................... ok
t/nnum.t ................... ok
t/overload.t ............... ok
12d: ignoring compiler bug that sets ~0 ** 1.0 to ~0 + 1
t/overload_cmp_reversal.t .. ok
Skipping test 1 - no recent version of Test::Pod installed
t/pod.t .................... ok
Ignoring small discrepancy (bug) between sqrt(2) and 2**0.5
t/pow.t .................... ok
FYI:
DBL_DIG = 15
LDBL_DIG = 18
Default precison = 21
t/prec.t ................... ok
t/signbit.t ................ ok
t/special.t ................ ok
t/stringification.t ........ ok
using own implementation of sincosl function
t/trig.t ................... ok
All tests successful.
Files=23, Tests=288, 1 wallclock secs ( 0.07 usr 0.04 sys + 0.33 cusr 0.28 csys = 0.72 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.10 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9156
CPANPLUS::Dist::Build 0.78
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.10
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.10
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
Module::Build 0.4216
Pod::Parser 1.37
Pod::Simple 3.16
Test::Harness 3.36
Test::More 1.001014
version 0.9912
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.94.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/_UIYXhxFAc/Math-LongDouble-0.17/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/_UIYXhxFAc/Math-LongDouble-0.17/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 70478
PERL5_CPANPLUS_IS_VERSION = 0.9156
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.14.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.14.3/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 3) configuration:
Platform:
osname=freebsd, osvers=10.2-release-p9, archname=amd64-freebsd
uname='freebsd fferi 10.2-release-p9 freebsd 10.2-release-p9 #0: thu jan 14 01:32:46 utc 2016 root@amd64-builder.daemonology.net:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.14.3'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 3.4.1 (tags/RELEASE_34/dot1-final 208032)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.40
Built under freebsd
Compiled at Jan 22 2016 13:46:04
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/_UIYXhxFAc/Math-LongDouble-0.17/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/_UIYXhxFAc/Math-LongDouble-0.17/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="70478"
PERL5_CPANPLUS_IS_VERSION="0.9156"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.14.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/_UIYXhxFAc/Math-LongDouble-0.17/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/_UIYXhxFAc/Math-LongDouble-0.17/blib/arch
/usr/home/cpan/pit/bare/perl-5.14.3/lib/site_perl/5.14.3/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.14.3/lib/site_perl/5.14.3
/usr/home/cpan/pit/bare/perl-5.14.3/lib/5.14.3/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.14.3/lib/5.14.3
.