Sys-RotateBackup v0.12 Perl 5 v5.39.3 x86_64-linux-thread-multi
- Status
- Fail
- From
- Andreas J. König (ANDK)
- Dist
-
Sys-RotateBackup v0.12
- Platform
- Perl 5 v5.39.3 x86_64-linux-thread-multi
- Date
- 2023-10-18 03:46:38
- ID
- f15ff9e4-6d68-11ee-ad63-a2a2c20ecd47
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Dominik Schulz,
This is a computer-generated report for Sys-RotateBackup-0.12
on perl 5.39.3, created by CPAN-Reporter-1.2019.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/tmp/basesmoker-reloperl-1MVi/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Sys::RotateBackup 0.12, Perl 5.039003, /tmp/basesmoker-reloperl-1MVi/bin/perl
t/00-load.t ............. ok
t/manifest.t ............ skipped: Author tests not required for installation
t/pod-coverage.t ........ ok
t/pod.t ................. ok
t/release-eol.t ......... skipped: these tests are for release candidate testing
t/release-no-tabs.t ..... skipped: these tests are for release candidate testing
t/release-pod-syntax.t .. skipped: these tests are for release candidate testing
# Failed test 'Got weekly directory'
# at t/rotate.t line 28.
# Failed test 'Got monthly directory'
# at t/rotate.t line 28.
# Failed test 'Got yearly directory'
# at t/rotate.t line 28.
# Failed test 'Still got weekly directory'
# at t/rotate.t line 43.
# Failed test 'Rotation 0 of type weekly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 1 of type weekly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 2 of type weekly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 3 of type weekly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 4 of type weekly exists'
# at t/rotate.t line 46.
# Failed test 'Still got monthly directory'
# at t/rotate.t line 43.
# Failed test 'Rotation 0 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 1 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 2 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 3 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 4 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 5 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 6 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 7 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 8 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 9 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 10 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 11 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 12 of type monthly exists'
# at t/rotate.t line 46.
# Failed test 'Still got yearly directory'
# at t/rotate.t line 43.
# Failed test 'Rotation 0 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 1 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 2 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 3 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 4 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 5 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 6 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 7 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 8 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 9 of type yearly exists'
# at t/rotate.t line 46.
# Failed test 'Rotation 10 of type yearly exists'
# at t/rotate.t line 46.
# Looks like you failed 35 tests of 59.
t/rotate.t ..............
Dubious, test returned 35 (wstat 8960, 0x2300)
Failed 35/59 subtests
Test Summary Report
-------------------
t/rotate.t (Wstat: 8960 (exited 35) Tests: 59 Failed: 35)
Failed tests: 3-5, 23-54
Non-zero exit status: 35
Files=8, Tests=62, 1 wallclock secs ( 0.03 usr 0.02 sys + 1.26 cusr 0.26 csys = 1.57 CPU)
Result: FAIL
Failed 1/8 test programs. 35/62 subtests failed.
make: *** [Makefile:869: test_dynamic] Error 35
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------------- ---- --------
feature 0 1.84
Log::Tree::RequiredLogger 0 0.18
Moose 0 2.2206
mro 0 1.28
namespace::autoclean 0 0.29
Sys::FS 0 0.11
Sys::Run 0 0.16
build_requires:
Module Need Have
--------------------------- ---- --------
File::Blarf 0 0.12
File::Temp 0 0.2311
strict 0 1.13
Test::MockObject::Universal 0 0.11
Test::MockTime 0 0.17
Test::More 0 1.302195
warnings 0 1.67
configure_requires:
Module Need Have
--------------------------- ---- --------
ExtUtils::MakeMaker 6.30 7.70
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LC_ADDRESS = de_DE.UTF-8
LC_IDENTIFICATION = de_DE.UTF-8
LC_MEASUREMENT = de_DE.UTF-8
LC_MONETARY = de_DE.UTF-8
LC_NAME = de_DE.UTF-8
LC_NUMERIC = de_DE.UTF-8
LC_PAPER = de_DE.UTF-8
LC_TELEPHONE = de_DE.UTF-8
LC_TIME = de_DE.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/local/sbin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/usr/local/perl/bin:/usr/X11/bin
PERL5LIB = /tmp/loop_over_bdir-1255584-m4BHmZ/LiquidWeb-Storm-CLI-1.03-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/LiquidWeb-Storm-CLI-1.03-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/DBIx-Migration-Directories-0.12-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/DBIx-Migration-Directories-0.12-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-BioYaTeA-0.11-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-BioYaTeA-0.11-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-YaTeA-0.626-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-YaTeA-0.626-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/CGI-Application-NetNewsIface-0.0204-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/CGI-Application-NetNewsIface-0.0204-0/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 1255592
PERL5_CPAN_IS_RUNNING = 1255592
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-1MVi/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.36
CPAN::Meta 2.150010
Cwd 3.90
ExtUtils::CBuilder 0.280240
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.90
JSON 4.10
JSON::PP 4.16
Module::Build 0.4234
Module::Signature 0.88
Parse::CPAN::Meta 2.150010
Test2 1.302195
Test::Harness 3.47
Test::More 1.302195
YAML 1.30
YAML::Syck 1.34
version 0.9930
--
Summary of my perl5 (revision 5 version 39 subversion 3) configuration:
Commit id: c8a2e4d1432cd1244a4e44d6bb71920b692076b7
Platform:
osname=linux
osvers=6.2.0-32-generic
archname=x86_64-linux-thread-multi
uname='linux k93jammy 6.2.0-32-generic #32~22.04.1-ubuntu smp preempt_dynamic fri aug 18 10:40:13 utc 2 x86_64 x86_64 x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.39.3/b4f3 -Dmyhostname=k93jammy -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Uuselongdouble -DEBUGGING=-g'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2 -g'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='11.4.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/x86_64-linux-gnu /usr/lib /usr/lib64
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/x86_64-linux-gnu/libc.so.6
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.35'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_LONG_DOUBLE
HAS_STRTOLD
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_SIPHASH13
PERL_HASH_USE_SBOX32
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
PERL_USE_SAFE_PUTENV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under linux
Compiled at Sep 20 2023 21:52:46
%ENV:
PERL5LIB="/tmp/loop_over_bdir-1255584-m4BHmZ/LiquidWeb-Storm-CLI-1.03-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/LiquidWeb-Storm-CLI-1.03-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/DBIx-Migration-Directories-0.12-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/DBIx-Migration-Directories-0.12-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-BioYaTeA-0.11-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-BioYaTeA-0.11-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-YaTeA-0.626-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-YaTeA-0.626-0/blib/lib:/tmp/loop_over_bdir-1255584-m4BHmZ/CGI-Application-NetNewsIface-0.0204-0/blib/arch:/tmp/loop_over_bdir-1255584-m4BHmZ/CGI-Application-NetNewsIface-0.0204-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="1255592"
PERL5_CPAN_IS_RUNNING="1255592"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/tmp/loop_over_bdir-1255584-m4BHmZ/LiquidWeb-Storm-CLI-1.03-0/blib/arch
/tmp/loop_over_bdir-1255584-m4BHmZ/LiquidWeb-Storm-CLI-1.03-0/blib/lib
/tmp/loop_over_bdir-1255584-m4BHmZ/DBIx-Migration-Directories-0.12-0/blib/arch
/tmp/loop_over_bdir-1255584-m4BHmZ/DBIx-Migration-Directories-0.12-0/blib/lib
/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-BioYaTeA-0.11-0/blib/arch
/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-BioYaTeA-0.11-0/blib/lib
/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-YaTeA-0.626-0/blib/arch
/tmp/loop_over_bdir-1255584-m4BHmZ/Lingua-YaTeA-0.626-0/blib/lib
/tmp/loop_over_bdir-1255584-m4BHmZ/CGI-Application-NetNewsIface-0.0204-0/blib/arch
/tmp/loop_over_bdir-1255584-m4BHmZ/CGI-Application-NetNewsIface-0.0204-0/blib/lib
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.39.3/b4f3/lib/site_perl/5.39.3/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.39.3/b4f3/lib/site_perl/5.39.3
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.39.3/b4f3/lib/5.39.3/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.39.3/b4f3/lib/5.39.3
.