Terse v0.20 Perl 5 v5.12.0 amd64-freebsd
- Status
- Unknown
- From
- Bartosz Jarzyna
- Dist
-
Terse v0.20
- Platform
- Perl 5 v5.12.0 amd64-freebsd
- Date
- 2023-09-04 16:13:17
- ID
- f5584882-4b3d-11ee-b586-a0aee5bc0b02
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Robert Acock,
This is a computer-generated report for Terse-0.20
on perl 5.12.0, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, attempting to
test your distribution gave an inconclusive result.
This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed. You may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/home/smoker12/perl5/perlbrew/perls/perl-5.12.0/bin/perl Makefile.PL':
Checking if your kit is complete...
Looks good
Warning: prerequisite Plack::Request 0 not found.
Warning: prerequisite Plack::Response 0 not found.
Warning: prerequisite Struct::WOP 0.15 not found.
Warning: prerequisite Test::Instruction 0 not found.
Warning: prerequisite Want 0 not found.
Bareword found where operator expected at ./Makefile.PL line 1, near "30 mtime"
(Missing operator before mtime?)
Number found where operator expected at ./Makefile.PL line 2, near "119"
(Missing semicolon on previous line?)
Bareword found where operator expected at ./Makefile.PL line 2, near "119 LIBARCHIVE"
(Missing operator before LIBARCHIVE?)
Number found where operator expected at ./Makefile.PL line 3, near "MDA4MTs2M2U4NWU2MjtDaHJvbWU7OEFCMjkwRjAtQjk0Ni00NDNBLUI1QzEtODI3RDUxRTI5RjEy
95"
(Missing semicolon on previous line?)
Bareword found where operator expected at ./Makefile.PL line 3, near "95 SCHILY"
(Missing operator before SCHILY?)
Bareword found where operator expected at ./Makefile.PL line 3, near "63e85e62"
(Missing operator before e62?)
Bareword found where operator expected at ./Makefile.PL line 3, near "8AB290F0"
(Missing operator before AB290F0?)
Bareword found where operator expected at ./Makefile.PL line 3, near "443A"
(Missing operator before A?)
Bareword found where operator expected at ./Makefile.PL line 3, near "827D51E29F12"
(Missing operator before D51E29F12?)
ERROR from evaluation of /usr/home/smoker12/.cpan/build/Terse-0.20-KpNy8u/PaxHeader/Makefile.PL: syntax error at ./Makefile.PL line 1, near "30 mtime"
Illegal octal digit '8' at ./Makefile.PL line 3, at end of line
syntax error at ./Makefile.PL line 3, near "8AB290F0"
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
configure_requires:
Module Need Have
------------------- ---- ----
ExtUtils::MakeMaker 0 7.64
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/smoker12/bin
PERL5LIB =
PERL5OPT = -I/tmp/CPAN-Reporter-lib-s24K -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 38713
PERL5_CPAN_IS_EXECUTING = /home/smoker12/.cpan/build/Terse-0.20-KpNy8u/Makefile.PL
PERL5_CPAN_IS_RUNNING = 38713
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 23449,38713
PERL_AUTOINSTALL = --defaultdeps
PERL_CR_SMOKER_CURRENT = Terse-0.20
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/sh
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/smoker12/perl5/perlbrew/perls/perl-5.12.0/bin/perl
$UID/$EUID = 1002 / 1002
$GID = 1002 1002
$EGID = 1002 1002
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.94_56
CPAN::Meta 2.143240
Cwd 3.31
ExtUtils::CBuilder 0.27
ExtUtils::Command 7.64
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 2.21
File::Spec 3.31
JSON n/a
JSON::PP 4.12
Module::Build 0.3603
Module::Signature n/a
Parse::CPAN::Meta 1.4414
Test::Harness 3.17
Test::More 1.302191
YAML n/a
YAML::Syck 1.34
version 0.9929
--
Summary of my perl5 (revision 5 version 12 subversion 0) configuration:
Platform:
osname=freebsd, osvers=13.1-release-p3, archname=amd64-freebsd
uname='freebsd smoker-10.smoker 13.1-release-p3 freebsd 13.1-release-p3 generic amd64 '
config_args='-de -Dprefix=/home/smoker12/perl5/perlbrew/perls/perl-5.12.0 -Duse64bitint -Aeval:scriptdir=/home/smoker12/perl5/perlbrew/perls/perl-5.12.0/bin'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='FreeBSD Clang 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Nov 17 2022 20:51:41
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="38713"
PERL5_CPAN_IS_EXECUTING="/home/smoker12/.cpan/build/Terse-0.20-KpNy8u/Makefile.PL"
PERL5_CPAN_IS_RUNNING="38713"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="23449,38713"
PERL_AUTOINSTALL="--defaultdeps"
PERL_CR_SMOKER_CURRENT="Terse-0.20"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/smoker12/perl5/perlbrew/perls/perl-5.12.0/lib/site_perl/5.12.0/amd64-freebsd
/home/smoker12/perl5/perlbrew/perls/perl-5.12.0/lib/site_perl/5.12.0
/home/smoker12/perl5/perlbrew/perls/perl-5.12.0/lib/5.12.0/amd64-freebsd
/home/smoker12/perl5/perlbrew/perls/perl-5.12.0/lib/5.12.0
.