Back
From: metabase:user:d2c9f356-b46f-11df-9a90-20a83c0b7757
Subject: UNKNOWN Filesys-SmbClient-3.1 v5.15.5 SunOS/Solaris
Date: 2011-12-18T09:45:03Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Alain Barbet,
This is a computer-generated report for Filesys-SmbClient-3.1
on perl 5.15.5, created by CPAN-Reporter-1.2003.
Thank you for uploading your work to CPAN. However, attempting to
test your distribution gave an inconclusive result.
This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed. You may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/export/home/cpant4/perl5/bin/perl5.15.5 Makefile.PL':
I search in: /export/home/cpant4/perl5/include
/usr/local/samba/include
/usr/local/include
/usr/include
/usr/local/samba3/include
Where can I find libsmbclient.h ? []
*************************************************************
** WHAT !!!!
** I Can't find /libsmbclient.h : No such file or directory.
*************************************************************
If you don't have this file you can download last version
of Samba on www.samba.org and do:
$ tar zxvf samba-2.2.x.tar.gz
$ cd samba-2.2.x/source
$ ./configure
$ make bin/libsmbclient.so
Then you can find libsmbclient.h in source/include directory and
libsmbclient.so in source/bin directory. You can then put them in
/usr/include and /usr/lib (or /usr/local/include and
/usr/local/lib)
I search in: /export/home/cpant4/perl5/lib
/usr/local/samba/lib
/usr/local/lib
/usr/lib
/usr/local/samba3/lib
Where can I find libsmbclient.so ? []
*************************************************************
** WHAT !!!!
** I Can't find libsmbclient.so : No such file or directory.
*************************************************************
If you don't have this file you can download last version
of Samba on www.samba.org and do:
$ tar zxvf samba-2.2.x.tar.gz
$ cd samba-2.2.x/source
$ ./configure
$ make bin/libsmbclient.so
Then you can find libsmbclient.h in source/include directory and
libsmbclient.so in source/bin directory. You can then put them in
/usr/include and /usr/lib (or /usr/local/include and
/usr/local/lib)
Do you want make tests ?(you will be prompted for server /
worgroup / share / user / password to make read write access. [yes] yes
Server ? [localhost] localhost
Share ? [homes] homes
Workgroup/Domain ? []
Smb user ? [cpant4] cpant4
Smb password ?
Compile module with trace to STDERR ? [no] no
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for egrep... egrep
checking for working alloca.h... yes
checking for alloca... yes
checking for smbc_mkdir in -lsmbclient... no
configure: error: I can't find your libsmbclient.so or symbol smbc_mkdir.
Check config.log for details.
Can't run configure:No such file or directory
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
LD_LIBRARY_PATH = /usr/local/lib:
PATH = /export/home/cpant4/perl5/bin:/usr/local/bin:/usr/bin
PERL5LIB =
PERL5OPT = -I/tmp/CPAN-Reporter-lib-QP30 -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 19471
PERL5_CPAN_IS_EXECUTING = /export/home/cpant4/.cpan/build/Filesys-SmbClient-3.1-smWwYC/Makefile.PL
PERL5_CPAN_IS_RUNNING = 19471
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 2919,19471
PERL_AUTOINSTALL = --defaultdeps
PERL_CR_SMOKER_CURRENT = App-Smbxfer-0.01
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /export/home/cpant4/perl5/bin/perl5.15.5
$UID/$EUID = 104 / 104
$GID = 1 1
$EGID = 1 1
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
CPAN::Meta 2.112621
Cwd 3.37
ExtUtils::CBuilder 0.280204
ExtUtils::Command 1.17
ExtUtils::Install 1.57
ExtUtils::MakeMaker 6.63_02
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.07
File::Spec 3.34
JSON 2.53
JSON::PP 2.27200
Module::Build 0.39_01
Module::Signature n/a
Parse::CPAN::Meta 1.4401
Test::Harness 3.23
Test::More 0.98
YAML 0.77
YAML::Syck 1.19
version 0.95
--
Summary of my perl5 (revision 5 version 15 subversion 5) configuration:
Platform:
osname=solaris, osvers=2.10, archname=i86pc-solaris-64int
uname='sunos vmrz0046 5.10 generic_141445-09 i86pc i386 i86pc solaris '
config_args='-Dcc=gcc -Dprefix=~/perl5 -Duse64bitint -Dusedevel -d'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.4.6', gccosandvers='solaris2.10'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib '
libpth=/usr/local/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -lgdbm -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_USE_DEVEL
PERL_USE_SAFE_PUTENV USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Built under solaris
Compiled at Nov 28 2011 11:34:47
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="19471"
PERL5_CPAN_IS_EXECUTING="/export/home/cpant4/.cpan/build/Filesys-SmbClient-3.1-smWwYC/Makefile.PL"
PERL5_CPAN_IS_RUNNING="19471"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="2919,19471"
PERL_AUTOINSTALL="--defaultdeps"
PERL_CR_SMOKER_CURRENT="App-Smbxfer-0.01"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/export/home/cpant4/perl5/lib/site_perl/5.15.5/i86pc-solaris-64int
/export/home/cpant4/perl5/lib/site_perl/5.15.5
/export/home/cpant4/perl5/lib/5.15.5/i86pc-solaris-64int
/export/home/cpant4/perl5/lib/5.15.5
/export/home/cpant4/perl5/lib/site_perl
.