Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL sane-0.02 v5.8.9 Dragonfly BSD
Date: 2011-10-22T16:00:39Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear PUNYTAN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9111. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Oct 22 16:59:59 2011] cp lib/sane.pm blib/lib/sane.pm
Manifying blib/man3/sane.3
[ERROR] [Sat Oct 22 17:00:00 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/pit/thr/perl-5.8.9/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use sane;'
# at t/00_compile.t line 4.
# Tried to use 'sane'.
# Error: Can't locate feature.pm in @INC (@INC contains: /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/inc /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/arch /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/arch /usr/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/i386-dragonfly-thread-multi /usr/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9 /usr/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/i386-dragonfly-thread-multi /usr/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9 .) at /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib/sane.pm line 14.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Looks like you failed 1 test of 1.
t/00_compile.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Can't locate feature.pm in @INC (@INC contains: /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/inc /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/arch /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/arch /usr/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/i386-dragonfly-thread-multi /usr/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9 /usr/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/i386-dragonfly-thread-multi /usr/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9 .) at /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib/sane.pm line 14.
BEGIN failed--compilation aborted at t/01_basic.t line 2.
t/01_basic.t ....
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Test Summary Report
-------------------
t/00_compile.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/01_basic.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=2, Tests=1, 0 wallclock secs ( 0.01 usr 0.09 sys + 0.08 cusr 0.12 csys = 0.29 CPU)
Result: FAIL
*** Error code 2
Stop in /usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02.
Failed 2/2 test programs. 1/1 subtests failed.
[MSG] [Sat Oct 22 17:00:00 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
feature
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'PUNYTAN (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'feature' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.59 6.42
Test::More 0.98 0.98
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9111
CPANPLUS::Dist::Build 0.58
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.59
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.05
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.94
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.64.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/pkg/sbin:/usr/pkg/bin:/usr/pkg/xorg/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 58775
PERL5_CPANPLUS_IS_VERSION = 0.9111
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.8.9/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=dragonfly, osvers=2.10-release, archname=i386-dragonfly-thread-multi
uname='dragonfly duvet.bingosnet.co.uk 2.10-release dragonfly v2.10.1.1.gf7ba0-release #1: mon apr 25 19:48:10 utc 2011 root@pkgbox32.dragonflybsd.org:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.8.9 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
USE_FAST_STDIO USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Built under dragonfly
Compiled at Aug 30 2011 16:39:06
%ENV:
PERL5LIB=":/usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="58775"
PERL5_CPANPLUS_IS_VERSION="0.9111"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/sane-0.02/blib/arch
/usr/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/i386-dragonfly-thread-multi
/usr/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9
/usr/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/i386-dragonfly-thread-multi
/usr/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9
.