SQL-SimpleOps v2023.274.1 Perl 5 v5.12.4 i86pc-solaris-64

Status

Pass

From

Chris Williams (BINGOS)

Dist

SQL-SimpleOps v2023.274.1

Platform

Perl 5 v5.12.4 i86pc-solaris-64

Date

2023-10-10 14:27:31

ID

25e87e0c-6779-11ee-98b0-b3c3213a625c

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear CCELSO,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  Congratulations!
All tests were successful.

TEST RESULTS:

Below is the error stack from stage 'make test':

PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.12.4/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# No type of test found
# See README.txt before doing any test
t/testDB.t ..... ok
# 
# ################################################################
# test: 010
# format: Delete( table=>"t1", force=>1 )
# rc: 0
# result: DELETE FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 011
# format: Delete( table=>"t1", where => [ fld => 123 ] )
# rc: 0
# result: DELETE FROM t1 WHERE fld = '123'
# status: SUCCESSFUL
# ################################################################
# test: 020
# format: Insert( table=>"t1", fields => { a => 1, b => 2, c => 3 } )
# rc: 0
# result: INSERT INTO t1 (a,b,c) VALUES ('1','2','3')
# status: SUCCESSFUL
# ################################################################
# test: 021
# format: Insert( table=>"t1", fields => [ "a","b","c" ], values => [ 1,2,3 ] )
# rc: 0
# result: INSERT INTO t1 (a,b,c) VALUES ('1','2','3')
# status: SUCCESSFUL
# ################################################################
# test: 030
# format: Update( table=>"t1", fields => { a => 1, b => 2 }, where => [ c => [ "!", 3 ] ] )
# rc: 0
# result: UPDATE t1 SET a = '1', b = '2' WHERE c != '3'
# status: SUCCESSFUL
# ################################################################
# test: 031
# format: Update( table=>"t1", fields => { a => '\concat(a,"xxxx")' }, force => 1 )
# rc: 0
# result: UPDATE t1 SET a = concat(a,"xxxx")
# status: SUCCESSFUL
# ################################################################
# test: 040
# format: Select( table=>"t1", fields => [ "a","b","c"] )
# rc: 0
# result: SELECT a, b, c FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 041
# format: Select( table=>"t1", fields => [ "a","b","c"], where => [ d=>4 ] )
# rc: 0
# result: SELECT a, b, c FROM t1 WHERE d = '4'
# status: SUCCESSFUL
# ################################################################
# test: 043
# format: Select( table=>"t1", fields => [ "a","b","c"], where => [ d=>4, e=>5 ] )
# rc: 0
# result: SELECT a, b, c FROM t1 WHERE d = '4' AND e = '5'
# status: SUCCESSFUL
# ################################################################
# test: 044
# format: Select( table=>"t1", fields => [ "a","b","c"], where => [ d=>'\substr(e,1,8)' ] )
# rc: 0
# result: SELECT a, b, c FROM t1 WHERE d = substr(e,1,8)
# status: SUCCESSFUL
# ################################################################
# test: 045
# format: Select( table=>["t1","t2"], fields => [ "t1.a","t2.b" ], where => [ 't1.a' => 't2.b' ] )
# rc: 0
# result: SELECT t1.a, t2.b FROM t1, t2 WHERE t1.a = t2.b
# status: SUCCESSFUL
# ################################################################
# test: 046
# format: Select( table=>"t1", fields => [ {"a"=>"aa"} ], where => [ 'a' => '0' ] )
# rc: 0
# result: SELECT a aa FROM t1 WHERE a = '0'
# status: SUCCESSFUL
# ################################################################
# test: 047
# format: Select( table=>"t1", fields => [ {"t1.a"=>"aa"} ], where => [ 't1.a' => '0' ] )
# rc: 0
# result: SELECT t1.a aa FROM t1 WHERE t1.a = '0'
# status: SUCCESSFUL
# ################################################################
# test: 048
# format: Select( table=>["t1","t2"], fields => [ {"t1.a"=>"aa"}, {"t2.b"=>"bb"} ], where => [ 't1.a' => 't2.b' ] )
# rc: 0
# result: SELECT t1.a aa, t2.b bb FROM t1, t2 WHERE t1.a = t2.b
# status: SUCCESSFUL
# ################################################################
# test: 049
# format: Select( table=>"t1", fields => [ {"sum(a)"=>"a1"}, {"sum(t1.a)"=>"a2"}, {"\sum(a)"=>"a3"} ], where => [ 'a' => '0' ] )
# rc: 0
# result: SELECT sum(a) a1, sum(t1.a) a2, sum(a) a3 FROM t1 WHERE a = '0'
# status: SUCCESSFUL
# ################################################################
# test: 050
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_TOP, limit=>100 )
# rc: 0
# note: Command=TOP, Cursor is empty
# result: SELECT a, b, c FROM t1 ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 051
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_NEXT, limit=>100 )
# rc: 0
# note: Command=NEXT, Cursor is empty
# result: SELECT a, b, c FROM t1 ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 052
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_BACK, limit=>100 )
# rc: 0
# note: Command=BACK, Cursor is empty
# result: SELECT a, b, c FROM t1 ORDER BY a DESC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 053
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_NEXT, limit=>100 )
# rc: 0
# note: Command=NEXT, Cursor is first(1) and last(100)
# result: SELECT a, b, c FROM t1 WHERE a > '100' ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 054
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_BACK, limit=>100 )
# rc: 0
# note: Command=BACK, Cursor is first(101) and last(200)
# result: SELECT a, b, c FROM t1 WHERE a < '101' ORDER BY a DESC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 055
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_RELOAD, limit=>100 )
# rc: 0
# note: Command=RELOAD, Cursor is first(1) and last(100)
# result: SELECT a, b, c FROM t1 WHERE a > '1' ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 056
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_LAST, limit=>100 )
# rc: 0
# note: Command=LAST, Cursor is first(1) and last(100)
# result: SELECT a, b, c FROM t1 ORDER BY a DESC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 057
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_TOP, limit=>0 )
# rc: 0
# note: Command=TOP, Limit is ZERO
# result: SELECT a, b, c FROM t1 ORDER BY a ASC
# status: SUCCESSFUL
# ################################################################
# test: 060
# format: Select( table=>"t1", fields => [ "distinct", "a" ] )
# rc: 0
# note: Select with DISTINCT array sequence
# result: SELECT DISTINCT a FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 061
# format: Select( table=>"t1", fields => [ "distinct" => "a" ] )
# rc: 0
# note: Select with DISTINCT based hash
# result: SELECT DISTINCT a FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 062
# format: Select( table=>"t1", fields => [ "count(*)" ] )
# rc: 0
# result: SELECT count(*) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 063
# format: Select( table=>"t1", fields => [ "max(t1.a)" ] )
# rc: 0
# result: SELECT max(t1.a) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 064
# format: Select( table=>"t1", fields => [ "max(a)" ] )
# rc: 0
# result: SELECT max(a) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 065
# format: Select( table=>"t1", fields => [ "substr(a,1,8)" ] )
# rc: 0
# result: SELECT substr(a,1,8) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 066
# format: Select( table=>"t1", fields => [ "\aaa.bbb.ccc" ] )
# rc: 0
# result: SELECT aaa.bbb.ccc FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 067
# format: Select( table=>"t1", fields => [ "distinct","\aaa.bbb.ccc" ] )
# rc: 0
# result: SELECT DISTINCT aaa.bbb.ccc FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 070
# format: Select( table=>["t1","t2"], fields => [ "t1.a","t2.b" ], where => [ 't1.a' => 't2.b' ], sql_save=>1 )
# rc: 0
# note: SQL_SAVE enabled
# result: SELECT t1.a, t2.b FROM t1, t2 WHERE t1.a = t2.b
# savefile: /tmp/2023/202310/20231010/sql.teste.20231010.3571.1
# savefile: removed
# status: SUCCESSFUL
# ################################################################
# test: 071
# format: Select( table=>"t1", order_by => "t1.a" )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a
# status: SUCCESSFUL
# ################################################################
# test: 072
# format: Select( table=>"t1", order_by => [ {"t1.a" => "asc"} ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a ASC
# status: SUCCESSFUL
# ################################################################
# test: 073
# format: Select( table=>"t1", order_by => [ {"t1.a" => "desc"} ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a DESC
# status: SUCCESSFUL
# ################################################################
# test: 074
# format: Select( table=>"t1", order_by => [ "t1.a", "t1.b" ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a, t1.b
# status: SUCCESSFUL
# ################################################################
# test: 075
# format: Select( table=>"t1", order_by => [ {"t1.a" => "asc"}, "t1.b" ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a ASC, t1.b
# status: SUCCESSFUL
# ################################################################
# test: 076
# format: Select( table=>"t1", order_by => [ "t1.a", {"t1.b"=>"desc"} ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a, t1.b DESC
# status: SUCCESSFUL
# ################################################################
# test: 077
# format: Select( table=>"t1", order_by => {"t1.b"=>"desc"} )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.b DESC
# status: SUCCESSFUL
# ################################################################
# 
# To see the input options used to create the 'where' clause, rerun the test with:
# 
# export SQL_SIMPLE_SQL_SHOW_OK=1
# 
t/testSQL.t .... ok
# 
# ################################################################
# result: id = 'info'
# test: 101, SUCCESSFUL
# ################################################################
# result: id = 'info'
# test: 102, SUCCESSFUL
# ################################################################
# result: id != 'info'
# test: 103, SUCCESSFUL
# ################################################################
# result: id < 'info'
# test: 104, SUCCESSFUL
# ################################################################
# result: id > 'info'
# test: 105, SUCCESSFUL
# ################################################################
# result: id LIKE 'info%'
# test: 106, SUCCESSFUL
# ################################################################
# result: id LIKE '%info%'
# test: 107, SUCCESSFUL
# ################################################################
# result: id LIKE '%info'
# test: 108, SUCCESSFUL
# ################################################################
# result: id LIKE 'info'
# test: 109, SUCCESSFUL
# ################################################################
# result: id IS NULL
# test: 110, SUCCESSFUL
# ################################################################
# result: id NOT NULL
# test: 111, SUCCESSFUL
# ################################################################
# result: id IN ('info1','info2')
# test: 112, SUCCESSFUL
# ################################################################
# result: id NOT IN ('info1','info2')
# test: 113, SUCCESSFUL
# ################################################################
# result: id BETWEEN ('info1','info2')
# test: 114, SUCCESSFUL
# ################################################################
# result: id NOT BETWEEN ('info1','info2')
# test: 115, SUCCESSFUL
# ################################################################
# result: id = 'info' AND id = 'info2' AND no = 'no1' AND no = 'no2'
# test: 120, SUCCESSFUL
# ################################################################
# result: id = 'info' AND id = 'info2' OR no = 'no1' AND no = 'no2'
# test: 121, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id
# test: 200, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id
# test: 201, SUCCESSFUL
# ################################################################
# result: t1.id != t2.id
# test: 202, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id AND t1.id = t3.id
# test: 210, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id AND t1.id = t3.id
# test: 211, SUCCESSFUL
# ################################################################
# result: t1.id != t2.id AND t1.id != t3.id
# test: 212, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id OR t1.id = t3.id
# test: 213, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id AND t1.id BETWEEN ('1234','5678') AND (t1.id != '0' OR t2.id != '0')
# test: 214, SUCCESSFUL
# ################################################################
# result: (id = '1' AND id = '2') AND (no = '3' AND no = '4')
# test: 220, SUCCESSFUL
# ################################################################
# result: (id LIKE '1%' OR id LIKE '2%') AND (no LIKE '%3' OR no LIKE '%4')
# test: 221, SUCCESSFUL
# ################################################################
# result: (id NOT LIKE '1%' AND id NOT LIKE '2%') AND (no NOT LIKE '%3' AND no NOT LIKE '%4')
# test: 222, SUCCESSFUL
# ################################################################
# result: (id NOT LIKE '1%' AND id NOT LIKE '2%') OR (no NOT LIKE '%3' AND no NOT LIKE '%4')
# test: 223, SUCCESSFUL
# ################################################################
# result: id NOT NULL OR no IS NULL
# test: 224, SUCCESSFUL
# ################################################################
# result: ((a = '1' AND b = '2') OR (c = '3' AND d = '4')) AND e = '5'
# test: 225, SUCCESSFUL
# ################################################################
# result: a = concat(a,'abc')
# test: 230, SUCCESSFUL
# ################################################################
# result: a != concat(a,'abc')
# test: 231, SUCCESSFUL
# 
# To see the input options used to create the 'where' clause, rerun the test with:
# 
# export SQL_SIMPLE_WHERE_SHOW_OK=1
# 
t/testWhere.t .. ok
All tests successful.
Files=3, Tests=5,  1 wallclock secs ( 0.05 usr  0.02 sys +  0.62 cusr  0.13 csys =  0.83 CPU)
Result: PASS


PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  DBD::SQLite                        1.74        0
	  DBI                               1.643        0
	  Date::Calc                          6.4        0
	  File::Path                         2.18        0
	  File::Spec                         3.75        0
	  IO::File                           1.14        0
	  JSON                               4.10        0
	  Sys::Syslog                        0.27        0
	  Test::More                     1.302195        0

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9914
	CPANPLUS::Dist::Build              0.90
	Cwd                                3.75
	ExtUtils::CBuilder             0.280236
	ExtUtils::Command                  7.70
	ExtUtils::Install                  2.22
	ExtUtils::MakeMaker                7.70
	ExtUtils::Manifest                 1.75
	ExtUtils::ParseXS                  3.44
	File::Spec                         3.75
	Module::Build                    0.4234
	Pod::Parser                        1.37
	Pod::Simple                        3.14
	Test2                          1.302195
	Test::Harness                      3.44
	Test::More                     1.302195
	version                          0.9929

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68

CPANPLUS is prefering Build.PL

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    NONINTERACTIVE_TESTING = 1
    PATH = /usr/bin:/usr/sbin:/sbin:/opt/ooce/bin:/usr/gnu/bin
    PERL5LIB = /home/cpan/pit/jail/NiA3uXmJBr/lib/perl5:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/fOoQFwPtAU/SQL-SimpleOps-2023.274.1/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/fOoQFwPtAU/SQL-SimpleOps-2023.274.1/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 2598
    PERL5_CPANPLUS_IS_VERSION = 0.9914
    PERL5_MINISMOKEBOX = 0.68
    PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.12.4
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/NiA3uXmJBr
    PERL_MB_OPT = --install_base "/home/cpan/pit/jail/NiA3uXmJBr"
    PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/NiA3uXmJBr
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.xterm-256color

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/pit/bare/perl-5.12.4/bin/perl
    UID:  $<  = 101
    EUID: $>  = 101
    GID:  $(  = 101 101
    EGID: $)  = 101 101


-------------------------------


--

Summary of my perl5 (revision 5 version 12 subversion 4) configuration:
   
  Platform:
    osname=solaris, osvers=2.11, archname=i86pc-solaris-64
    uname='sunos ouzel 5.11 omnios-r151034-0d278a0cc5 i86pc i386 i86pc '
    config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.12.4 -Duse64bitall -Dcc=gcc'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-m64 -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV',
    optimize='-O',
    cppflags='-m64 -fwrapv -fno-strict-aliasing -pipe -fstack-protector'
    ccversion='', gccversion='9.3.0', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -m64 -fstack-protector -L/usr/gnu/lib '
    libpth=/usr/gnu/lib /usr/lib /usr/ccs/lib
    libs=-lsocket -lnsl -ldl -lm -lc
    perllibs=-lsocket -lnsl -ldl -lm -lc
    libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='  -R /home/cpan/pit/bare/perl-5.12.4/lib/5.12.4/i86pc-solaris-64/CORE'
    cccdlflags='-fPIC', lddlflags=' -shared -m64 -L/usr/gnu/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
                        PERL_USE_SAFE_PUTENV USE_64_BIT_ALL USE_64_BIT_INT
                        USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
  Locally applied patches:
	Devel::PatchPerl 2.00
  Built under solaris
  Compiled at Aug 19 2020 03:42:31
  %ENV:
    PERL5LIB="/home/cpan/pit/jail/NiA3uXmJBr/lib/perl5:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/fOoQFwPtAU/SQL-SimpleOps-2023.274.1/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/fOoQFwPtAU/SQL-SimpleOps-2023.274.1/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="2598"
    PERL5_CPANPLUS_IS_VERSION="0.9914"
    PERL5_MINISMOKEBOX="0.68"
    PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.12.4"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/NiA3uXmJBr"
    PERL_MB_OPT="--install_base "/home/cpan/pit/jail/NiA3uXmJBr""
    PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/NiA3uXmJBr"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/cpan/pit/jail/NiA3uXmJBr/lib/perl5/5.12.4/i86pc-solaris-64
    /home/cpan/pit/jail/NiA3uXmJBr/lib/perl5/5.12.4
    /home/cpan/pit/jail/NiA3uXmJBr/lib/perl5/i86pc-solaris-64
    /home/cpan/pit/jail/NiA3uXmJBr/lib/perl5
    /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/fOoQFwPtAU/SQL-SimpleOps-2023.274.1/blib/lib
    /home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/fOoQFwPtAU/SQL-SimpleOps-2023.274.1/blib/arch
    /home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4/i86pc-solaris-64
    /home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4
    /home/cpan/pit/bare/perl-5.12.4/lib/5.12.4/i86pc-solaris-64
    /home/cpan/pit/bare/perl-5.12.4/lib/5.12.4
    .