Report for MooseX-App-Cmd-0.33

Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL MooseX-App-Cmd-0.33 5.24.3 FreeBSD
Date: 2021-03-19T13:30:12Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear ETHER,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9910. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

# 
# Versions for all modules listed in MYMETA.json (including optional ones):
# 
# === Configure Requires ===
# 
#     Module               Want  Have
#     ------------------- ----- -----
#     ExtUtils::MakeMaker   any  7.58
#     Module::Build::Tiny 0.034 0.039
# 
# === Test Requires ===
# 
#     Module           Want     Have
#     ---------------- ---- --------
#     Data::Dumper      any    2.160
#     File::Spec        any     3.75
#     Module::Metadata  any 1.000031
#     Test::More        any 1.302183
#     base              any  2.23_01
#     lib               any     0.63
#     strict            any     1.11
#     warnings          any     1.36
# 
# === Test Recommends ===
# 
#     Module         Want     Have
#     ---------- -------- --------
#     CPAN::Meta 2.120900 2.150010
# 
# === Test Suggests ===
# 
#     Module                 Want    Have
#     ---------------------- ---- -------
#     MooseX::ConfigFromFile  any missing
#     Test::Output            any missing
#     YAML                    any missing
# 
# === Runtime Requires ===
# 
#     Module                     Want   Have
#     ------------------------- ----- ------
#     App::Cmd                  0.321  0.333
#     App::Cmd::Command           any  0.333
#     Getopt::Long::Descriptive 0.091  0.109
#     Moose::Object               any 2.2014
#     MooseX::NonMoose            any   0.26
#     namespace::autoclean        any   0.29
# 
# === Runtime Suggests ===
# 
#     Module         Want    Have
#     -------------- ---- -------
#     Moose           any  2.2014
#     MooseX::Getopt  any missing
# 
# === Other Modules ===
# 
#     Module                Have
#     --------------- ----------
#     Encode             2.80_01
#     File::Temp          0.2311
#     JSON::PP        2.27300_01
#     Module::Runtime      0.016
#     Pod::Coverage      missing
#     Sub::Name             0.26
#     YAML               missing
#     autodie               2.29
# 
t/00-report-prereqs.t ... ok
You can only consume roles, MooseX::Getopt is not a Moose role at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/i386-freebsd-thread-multi/Moose/Exporter.pm line 419
	Moose::with('MooseX::Getopt') called at /usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/lib/MooseX/App/Cmd/Command.pm line 9
	require MooseX/App/Cmd/Command.pm at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Module/Runtime.pm line 314
	Module::Runtime::require_module('MooseX::App::Cmd::Command') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Module/Runtime.pm line 391
	eval {...} at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Module/Runtime.pm line 391
	Module::Runtime::use_package_optimistically('MooseX::App::Cmd::Command') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/i386-freebsd-thread-multi/Moose/Util.pm line 351
	Moose::Util::_load_user_class('MooseX::App::Cmd::Command', undef) called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/i386-freebsd-thread-multi/Moose/Meta/Class.pm line 569
	Moose::Meta::Class::superclasses(undef, 'MooseX::App::Cmd::Command') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/i386-freebsd-thread-multi/Moose.pm line 53
	Moose::extends('Moose::Meta::Class=HASH(0x21a461c0)', 'MooseX::App::Cmd::Command') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/i386-freebsd-thread-multi/Moose/Exporter.pm line 419
	Moose::extends('MooseX::App::Cmd::Command') called at t/lib/Test/MyCmd/Command/bark.pm line 4
	require Test/MyCmd/Command/bark.pm at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Module/Runtime.pm line 314
	Module::Runtime::require_module('Test::MyCmd::Command::bark') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Class/Load.pm line 174
	Class::Load::try {...}  at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Try/Tiny.pm line 98
	eval {...} at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Try/Tiny.pm line 93
	Try::Tiny::try('CODE(0x2196b1a0)', 'Try::Tiny::Catch=REF(0x219fe2c0)') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Class/Load.pm line 180
	Class::Load::try_load_class('Test::MyCmd::Command::bark', undef) called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Class/Load.pm line 35
	Class::Load::load_class('Test::MyCmd::Command::bark') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/App/Cmd.pm line 199
	App::Cmd::_command('Test::MyCmd=HASH(0x20865f10)', 'HASH(0x20865eb0)') called at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/App/Cmd.pm line 177
	App::Cmd::new('Test::MyCmd') called at constructor MooseX::App::Cmd::new (defined at /usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/lib/MooseX/App/Cmd.pm line 12) line 4
	MooseX::App::Cmd::new('Test::MyCmd') called at t/basic.t line 10
Compilation failed in require at /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/Module/Runtime.pm line 314.
Compilation failed in require at t/basic.t line 10.
# Looks like your test exited with 255 before it could output anything.
t/basic.t ............... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests 
t/build_emulates_new.t .. ok
t/configfile.t .......... skipped: These tests require MooseX::ConfigFromFile and YAML
t/moose.t ............... skipped: Moose and MooseX::Getopt required to test Moose usage
t/zzz-check-breaks.t .... ok

Test Summary Report
-------------------
t/basic.t             (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 12 tests but ran 0.
Files=6, Tests=5,  4 wallclock secs ( 0.05 usr  0.03 sys +  2.82 cusr  0.82 csys =  3.73 CPU)
Result: FAIL


PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  App::Cmd                          0.333    0.321
	  App::Cmd::Command                 0.333        0
	  Data::Dumper                      2.160        0
	  File::Spec                         3.75        0
	  Getopt::Long::Descriptive         0.109    0.091
	  Module::Metadata               1.000031        0
	  Moose::Object                    2.2014        0
	  MooseX::NonMoose                   0.26        0
	  Test::More                     1.302183        0
	  base                            2.23_01        0
	  lib                                0.63        0
	  namespace::autoclean               0.29        0
	  strict                             1.11        0
	  warnings                           1.36        0

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9910
	CPANPLUS::Dist::Build              0.90
	Cwd                                3.75
	ExtUtils::CBuilder             0.280235
	ExtUtils::Command                  7.58
	ExtUtils::Install                  2.20
	ExtUtils::MakeMaker                7.58
	ExtUtils::Manifest                 1.73
	ExtUtils::ParseXS                  3.35
	File::Spec                         3.75
	Module::Build                    0.4231
	Pod::Parser                        1.63
	Pod::Simple                        3.32
	Test2                          1.302183
	Test::Harness                      3.42
	Test::More                     1.302183
	version                          0.9928

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68

CPANPLUS is prefering Build.PL

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    NONINTERACTIVE_TESTING = 1
    PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 97914
    PERL5_CPANPLUS_IS_VERSION = 0.9910
    PERL5_MINISMOKEBOX = 0.68
    PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.24.3
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/X7vw5wigAz
    PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/X7vw5wigAz"
    PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/X7vw5wigAz
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/pit/thr/perl-5.24.3/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 1002 1002
    EGID: $)  = 1002 1002


-------------------------------


--

Summary of my perl5 (revision 5 version 24 subversion 3) configuration:
   
  Platform:
    osname=freebsd, osvers=12.2-release, archname=i386-freebsd-thread-multi
    uname='freebsd ffyrc 12.2-release freebsd 12.2-release r366954 generic i386 '
    config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.24.3 -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include',
    optimize='-O2',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
    ccversion='', gccversion='FreeBSD Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234, doublekind=3
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12, longdblkind=3
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -fstack-protector-strong -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib /usr/lib/clang/10.0.1/lib /usr/lib
    libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil
    perllibs=-lpthread -ldl -lm -lcrypt -lutil
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib -fstack-protector-strong'


Characteristics of this binary (from libperl): 
  Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
                        PERL_COPY_ON_WRITE PERL_DONT_CREATE_GVSV
                        PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
                        PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
                        PERL_PRESERVE_IVUV USE_ITHREADS USE_LARGE_FILES
                        USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
                        USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
                        USE_PERL_ATOF USE_REENTRANT_API
  Locally applied patches:
	Devel::PatchPerl 2.00
  Built under freebsd
  Compiled at Nov  1 2020 22:38:20
  %ENV:
    PERL5LIB="/usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="97914"
    PERL5_CPANPLUS_IS_VERSION="0.9910"
    PERL5_MINISMOKEBOX="0.68"
    PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.24.3"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/X7vw5wigAz"
    PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/X7vw5wigAz""
    PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/X7vw5wigAz"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/5.24.3/i386-freebsd-thread-multi
    /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/5.24.3
    /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5/i386-freebsd-thread-multi
    /usr/home/cpan/pit/jail/X7vw5wigAz/lib/perl5
    /usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/lib
    /usr/home/cpan/pit/thr/conf/perl-5.24.3/.cpanplus/5.24.3/build/oAZX76DTzZ/MooseX-App-Cmd-0.33/blib/arch
    /usr/home/cpan/pit/thr/perl-5.24.3/lib/site_perl/5.24.3/i386-freebsd-thread-multi
    /usr/home/cpan/pit/thr/perl-5.24.3/lib/site_perl/5.24.3
    /usr/home/cpan/pit/thr/perl-5.24.3/lib/5.24.3/i386-freebsd-thread-multi
    /usr/home/cpan/pit/thr/perl-5.24.3/lib/5.24.3
    .