Sys-SigAction v0.23 Perl 5 v5.16.3 x86_64-linux-thread-multi
- Status
- Pass
- From
- Dist
-
Sys-SigAction v0.23
- Platform
- Perl 5 v5.16.3 x86_64-linux-thread-multi
- Date
- 2018-04-05 13:57:44
- ID
- 50b95e5a-38d9-11e8-8bec-24957a847856
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Lincoln A Baxter,
This is a computer-generated report for Sys-SigAction-0.23
on perl 5.16.3, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/alternatives.t ...... ok
t/inline_nested.t ..... ok
t/mask.t .............. ok
t/name.t .............. ok
t/number.t ............ ok
t/recursive_nested.t .. ok
NOTE: Setting safe=>1... with masked signals does not seem to work.
The problem is that the masked signals are not masked when safe=>1.
When safe=>0 they are.
If you have an application for safe=>1 and can come up with a patch
for this module that gets this test working, or a patch to the test
that shows how to fix it, please send it to me.
See the block below this one... which if executed would test safe mode
with masked signals... it is a clone of part of mask.t that proves this
is broken.
This test can be executed from the command line as follows:
SAFE_T=1 perl -Ilib t/safe.t
Lincoln
t/safe.t .............. ok
# delta time was 0.100257, timer was for 0.1 secconds
t/timeout.t ........... ok
All tests successful.
Files=8, Tests=87, 8 wallclock secs ( 0.04 usr 0.01 sys + 0.49 cusr 0.07 csys = 0.61 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- -------- --------
perl 5.006000 5.016003
POSIX 0 1.30
Test::More 0 1.302106
build_requires:
Module Need Have
------------------- -------- --------
ExtUtils::MakeMaker 0 7.34
configure_requires:
Module Need Have
------------------- -------- --------
ExtUtils::MakeMaker 0 7.34
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = en_GB.UTF-8
LD_LIBRARY_PATH = /home/chaz/.local/lib64
PATH = /home/chaz/.cargo/bin:/home/chaz/perl5/bin:/home/chaz/bin:/home/chaz/.local/bin:/home/chaz/.cargo/bin:/home/chaz/.rvm/gems/ruby-2.1.0/bin:/home/chaz/.rvm/gems/ruby-2.1.0@global/bin:/home/chaz/.rvm/rubies/ruby-2.1.0/bin:/home/chaz/perl5/bin:/home/chaz/bin:/home/chaz/.local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/chaz/.rvm/bin:/home/chaz/.rvm/bin
PERL5LIB = /home/chaz/perl5/lib/perl5:/home/chaz/.local/share/perl5/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 8749
PERL5_CPAN_IS_RUNNING = 8749
PERL_LOCAL_LIB_ROOT = /home/chaz/perl5:/home/chaz/perl5
PERL_MB_OPT = --install_base "/home/chaz/perl5"
PERL_MM_OPT = INSTALL_BASE=/home/chaz/perl5
SHELL = /bin/bash
TERM = xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 10 974 985 997 1000
$EGID = 1000 10 974 985 997 1000
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.16
CPAN::Meta 2.150010
Cwd 3.40
ExtUtils::CBuilder 0.280206
ExtUtils::Command 7.34
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.35
File::Spec 3.40
JSON 2.97001
JSON::PP 2.94
Module::Build 0.4224
Module::Signature n/a
Parse::CPAN::Meta 2.150010
Test::Harness 3.39
Test::More 1.302106
YAML 1.24
YAML::Syck n/a
version 0.9918
--
Summary of my perl5 (revision 5 version 16 subversion 3) configuration:
Platform:
osname=linux, osvers=3.10.0-514.16.1.el7.x86_64, archname=x86_64-linux-thread-multi
uname='linux c1bm.rdu2.centos.org 3.10.0-514.16.1.el7.x86_64 #1 smp wed apr 12 15:04:24 utc 2017 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Dccdlflags=-Wl,--enable-new-dtags -Dlddlflags=-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro -DDEBUGGING=-g -Dversion=5.16.3 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib64/perl5 -Dprivlib=/usr/share/perl5 -Dvendorlib=/usr/share/perl5/vendor_perl -Darchlib=/usr/lib64/perl5 -Dvendorarch=/usr/lib64/perl5/vendor_perl -Darchname=x86_64-linux-thread-multi -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Duseshrplib -Dusethreads -Duseithreads -Dusedtrace=/usr/bin/dtrace -Duselargefiles -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dscriptdir=/usr/bin -Dusesitecustomize'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.8.5 20150623 (Red Hat 4.8.5-16)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -fstack-protector'
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.17'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,--enable-new-dtags -Wl,-rpath,/usr/lib64/perl5/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro '
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API USE_SITECUSTOMIZE
Locally applied patches:
Fedora Patch1: Removes date check, Fedora/RHEL specific
Fedora Patch3: support for libdir64
Fedora Patch4: use libresolv instead of libbind
Fedora Patch5: USE_MM_LD_RUN_PATH
Fedora Patch6: Skip hostname tests, due to builders not being network capable
Fedora Patch7: Dont run one io test due to random builder failures
Fedora Patch9: Fix find2perl to translate ? glob properly (RT#113054)
Fedora Patch10: Fix broken atof (RT#109318)
Fedora Patch13: Clear $@ before "do" I/O error (RT#113730)
Fedora Patch14: Do not truncate syscall() return value to 32 bits (RT#113980)
Fedora Patch15: Override the Pod::Simple::parse_file (CPANRT#77530)
Fedora Patch16: Do not leak with attribute on my variable (RT#114764)
Fedora Patch17: Allow operator after numeric keyword argument (RT#105924)
Fedora Patch18: Extend stack in File::Glob::glob, (RT#114984)
Fedora Patch19: Do not crash when vivifying $|
Fedora Patch20: Fix misparsing of maketext strings (CVE-2012-6329)
Fedora Patch21: Add NAME headings to CPAN modules (CPANRT#73396)
Fedora Patch22: Fix leaking tied hashes (RT#107000) [1]
Fedora Patch23: Fix leaking tied hashes (RT#107000) [2]
Fedora Patch24: Fix leaking tied hashes (RT#107000) [3]
Fedora Patch25: Fix dead lock in PerlIO after fork from thread (RT#106212)
Fedora Patch26: Make regexp safe in a signal handler (RT#114878)
Fedora Patch27: Update h2ph(1) documentation (RT#117647)
Fedora Patch28: Update pod2html(1) documentation (RT#117623)
Fedora Patch29: Document Math::BigInt::CalcEmu requires Math::BigInt (CPAN RT#85015)
RHEL Patch30: Use stronger algorithm needed for FIPS in t/op/crypt.t (RT#121591)
RHEL Patch31: Make *DBM_File desctructors thread-safe (RT#61912)
RHEL Patch32: Use stronger algorithm needed for FIPS in t/op/taint.t (RT#123338)
RHEL Patch33: Remove CPU-speed-sensitive test in Benchmark test
RHEL Patch34: Make File::Glob work with threads again
RHEL Patch35: Fix CRLF conversion in ASCII FTP upload (CPAN RT#41642)
RHEL Patch36: Do not leak the temp utf8 copy of namepv (CPAN RT#123786)
RHEL Patch37: Fix duplicating PerlIO::encoding when spawning threads (RT#31923)
Built under linux
Compiled at Aug 2 2017 17:45:03
%ENV:
PERL5LIB="/home/chaz/perl5/lib/perl5:/home/chaz/.local/share/perl5/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="8749"
PERL5_CPAN_IS_RUNNING="8749"
PERL_LOCAL_LIB_ROOT="/home/chaz/perl5:/home/chaz/perl5"
PERL_MB_OPT="--install_base "/home/chaz/perl5""
PERL_MM_OPT="INSTALL_BASE=/home/chaz/perl5"
@INC:
/home/chaz/perl5/lib/perl5/5.16.3/x86_64-linux-thread-multi
/home/chaz/perl5/lib/perl5/5.16.3
/home/chaz/perl5/lib/perl5/x86_64-linux-thread-multi
/home/chaz/perl5/lib/perl5
/home/chaz/.local/share/perl5/lib
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl
/usr/lib64/perl5
/usr/share/perl5
.