Database-Abstraction v0.26 Perl 5 v5.30.1 x86_64-linux-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Database-Abstraction v0.26
- Platform
- Perl 5 v5.30.1 x86_64-linux-thread-multi
- Date
- 2025-06-08 04:46:46
- ID
- 95355c52-4423-11f0-acaa-c91c7f7edd59
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Nigel Horne,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9916. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.30.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Database::Abstraction 0.26, Perl 5.030001, /home/cpan/pit/thr/perl-5.30.1/bin/perl
t/00-load.t ........... ok
t/10-compile.t ........ ok
t/20-new.t ............ ok
t/30-basics.t ......... ok
t/carp.t .............. ok
t/chi.t ............... ok
t/comment-spelling.t .. skipped: Not running author tests
t/csv.t ............... ok
t/csv_id.t ............ ok
t/eof.t ............... skipped: Not running author tests
t/eol.t ............... skipped: Not running author tests
t/init.t .............. ok
Use of uninitialized value $_[0] in numeric eq (==) at (eval in cmp_ok) t/logger.t line 60.
Test::Builder::__ANON__[(eval in cmp_ok) t/logger.t:60](undef, 8) called at /home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/Test/Builder.pm line 979
eval {...} called at /home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/Test/Builder.pm line 978
Test::Builder::cmp_ok(Test::Builder=HASH(0x7f607903cb18), undef, "==", 8, "Setting the logger as a ref to code works") called at /home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/Test/More.pm line 533
Test::More::cmp_ok(undef, "==", 8, "Setting the logger as a ref to code works") called at t/logger.t line 60
# Failed test 'Setting the logger as a ref to code works'
# at t/logger.t line 60.
Use of uninitialized value $val in addition (+) at /home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/Test/Builder.pm line 792.
Test::Builder::_is_dualvar(Test::Builder=HASH(0x7f607903cb18), undef) called at /home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/Test/Builder.pm line 779
Test::Builder::_unoverload_num(Test::Builder=HASH(0x7f607903cb18), SCALAR(0x7f6078620ec8), SCALAR(0x7f6078620ef8)) called at /home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/Test/Builder.pm line 1003
Test::Builder::cmp_ok(Test::Builder=HASH(0x7f607903cb18), undef, "==", 8, "Setting the logger as a ref to code works") called at /home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/Test/More.pm line 533
Test::More::cmp_ok(undef, "==", 8, "Setting the logger as a ref to code works") called at t/logger.t line 60
# got: undef
# expected: 8
# Failed test 'File contains some debugging'
# at t/logger.t line 80.
# ''
# doesn't match '(?^ms:^DEBUG: )'
# Failed test 'File contains some tracing'
# at t/logger.t line 81.
# ''
# doesn't match '(?^ms:^TRACE: )'
# Failed test at t/logger.t line 96.
# Structures begin differing at:
# $got = undef
# $expected = HASH(0x7f60764eb338)
# Looks like you failed 1 test of 3.
# Failed test 'Logger with Array'
# at t/logger.t line 101.
# Looks like you planned 34 tests but ran 26.
# Looks like you failed 4 tests of 26 run.
t/logger.t ............
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 12/34 subtests
t/no_entry.t .......... ok
t/passwd.t ............ ok
t/pod-cm.t ............ skipped: Not running author tests
t/pod-coverage.t ...... skipped: Not running author tests
t/pod-links.t ......... skipped: Not running author tests
t/pod-snippets.t ...... skipped: Not running author tests
t/pod-spelling.t ...... skipped: Not running author tests
t/pod-synopsis.t ...... skipped: Not running author tests
t/pod.t ............... skipped: Not running author tests
t/psv.t ............... ok
t/tabs.t .............. skipped: Not running author tests
t/test7.t ............. ok
t/test8.t ............. ok
t/two_databases.t ..... ok
t/vars.t .............. skipped: Not running author tests
t/version.t ........... skipped: Not running author tests
t/xml.t ............... ok
t/xml_record.t ........ ok
Test Summary Report
-------------------
t/logger.t (Wstat: 1024 (exited 4) Tests: 26 Failed: 4)
Failed tests: 20, 23-24, 26
Non-zero exit status: 4
Parse errors: Bad plan. You planned 34 tests but ran 26.
Files=31, Tests=160, 6 wallclock secs ( 0.08 usr 0.05 sys + 5.01 cusr 1.02 csys = 6.16 CPU)
Result: FAIL
Failed 1/31 test programs. 4/160 subtests failed.
make: *** [Makefile:932: test_dynamic] Error 255
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.50 0
Config::Auto 0.44 0
DBD::CSV 0.62 0
DBD::SQLite::Constants 0 0
DBD::XMLSimple 0.07 0.07
Data::Dumper 2.174 0
Data::Reuse 0.13 0
ExtUtils::MakeMaker 7.74 6.64
File::Spec 3.78 0
File::Temp 0.2311 0
File::pfopen 0.03 0.03
FindBin 1.51 0
Log::Abstraction 0.18 0.05
Params::Get 0.08 0
Scalar::Util 1.50 0
Test::Carp 0.2 0
Test::Compile v3.3.3 0
Test::DescribeMe 0.004 0
Test::Most 0.38 0
Test::Needs 0.002010 0
Test::NoWarnings 1.06 0
Text::xSV::Slurp 0.23 0
XML::Simple 2.25 0
autodie 2.29 0
boolean 0.46 0
strict 1.11 0
warnings 1.44 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9916
CPANPLUS::Dist::Build 0.90
Cwd 3.78
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.74
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.74
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.78
Module::Build 0.4234
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302210
Test::Harness 3.50
Test::More 1.302210
version 0.9933
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/Yuh9XU_KoC/lib/perl5:/home/cpan/pit/thr/conf/perl-5.30.1/.cpanplus/5.30.1/build/xl5Dpxu6XG/Database-Abstraction-0.26/blib/lib:/home/cpan/pit/thr/conf/perl-5.30.1/.cpanplus/5.30.1/build/xl5Dpxu6XG/Database-Abstraction-0.26/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 2694
PERL5_CPANPLUS_IS_VERSION = 0.9916
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.30.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/Yuh9XU_KoC
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/Yuh9XU_KoC"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/Yuh9XU_KoC
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.30.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 30 subversion 1) configuration:
Platform:
osname=linux
osvers=5.10.16-0-lts
archname=x86_64-linux-thread-multi
uname='linux agaric 5.10.16-0-lts #1-alpine smp wed, 17 feb 2021 08:17:06 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.30.1 -Dusethreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong'
ccversion=''
gccversion='10.2.1 20201203'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/include/fortify /usr/lib /usr/local/lib /lib/../lib /usr/lib/../lib /lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=/usr/lib/libc.a
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 13 2021 03:36:46
%ENV:
PERL5LIB="/home/cpan/pit/jail/Yuh9XU_KoC/lib/perl5:/home/cpan/pit/thr/conf/perl-5.30.1/.cpanplus/5.30.1/build/xl5Dpxu6XG/Database-Abstraction-0.26/blib/lib:/home/cpan/pit/thr/conf/perl-5.30.1/.cpanplus/5.30.1/build/xl5Dpxu6XG/Database-Abstraction-0.26/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="2694"
PERL5_CPANPLUS_IS_VERSION="0.9916"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.30.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/Yuh9XU_KoC"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/Yuh9XU_KoC""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/Yuh9XU_KoC"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/pit/jail/Yuh9XU_KoC/lib/perl5/5.30.1/x86_64-linux-thread-multi
/home/cpan/pit/jail/Yuh9XU_KoC/lib/perl5/5.30.1
/home/cpan/pit/jail/Yuh9XU_KoC/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/Yuh9XU_KoC/lib/perl5
/home/cpan/pit/thr/conf/perl-5.30.1/.cpanplus/5.30.1/build/xl5Dpxu6XG/Database-Abstraction-0.26/blib/lib
/home/cpan/pit/thr/conf/perl-5.30.1/.cpanplus/5.30.1/build/xl5Dpxu6XG/Database-Abstraction-0.26/blib/arch
/home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.30.1/lib/site_perl/5.30.1
/home/cpan/pit/thr/perl-5.30.1/lib/5.30.1/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.30.1/lib/5.30.1
.