SQL-SimpleOps v2023.274.1 Perl 5 v5.30.2 i386-freebsd-thread-multi

Status

Pass

From

Chris Williams (BINGOS)

Dist

SQL-SimpleOps v2023.274.1

Platform

Perl 5 v5.30.2 i386-freebsd-thread-multi

Date

2023-10-09 11:33:00

ID

99baf888-6697-11ee-98b0-b3c3213a625c

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear CCELSO,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  Congratulations!
All tests were successful.

TEST RESULTS:

Below is the error stack from stage 'make test':

PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/thr/perl-5.30.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# No type of test found
# See README.txt before doing any test
t/testDB.t ..... ok
# 
# ################################################################
# test: 010
# format: Delete( table=>"t1", force=>1 )
# rc: 0
# result: DELETE FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 011
# format: Delete( table=>"t1", where => [ fld => 123 ] )
# rc: 0
# result: DELETE FROM t1 WHERE fld = '123'
# status: SUCCESSFUL
# ################################################################
# test: 020
# format: Insert( table=>"t1", fields => { a => 1, b => 2, c => 3 } )
# rc: 0
# result: INSERT INTO t1 (a,b,c) VALUES ('1','2','3')
# status: SUCCESSFUL
# ################################################################
# test: 021
# format: Insert( table=>"t1", fields => [ "a","b","c" ], values => [ 1,2,3 ] )
# rc: 0
# result: INSERT INTO t1 (a,b,c) VALUES ('1','2','3')
# status: SUCCESSFUL
# ################################################################
# test: 030
# format: Update( table=>"t1", fields => { a => 1, b => 2 }, where => [ c => [ "!", 3 ] ] )
# rc: 0
# result: UPDATE t1 SET b = '2', a = '1' WHERE c != '3'
# status: SUCCESSFUL
# ################################################################
# test: 031
# format: Update( table=>"t1", fields => { a => '\concat(a,"xxxx")' }, force => 1 )
# rc: 0
# result: UPDATE t1 SET a = concat(a,"xxxx")
# status: SUCCESSFUL
# ################################################################
# test: 040
# format: Select( table=>"t1", fields => [ "a","b","c"] )
# rc: 0
# result: SELECT a, b, c FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 041
# format: Select( table=>"t1", fields => [ "a","b","c"], where => [ d=>4 ] )
# rc: 0
# result: SELECT a, b, c FROM t1 WHERE d = '4'
# status: SUCCESSFUL
# ################################################################
# test: 043
# format: Select( table=>"t1", fields => [ "a","b","c"], where => [ d=>4, e=>5 ] )
# rc: 0
# result: SELECT a, b, c FROM t1 WHERE d = '4' AND e = '5'
# status: SUCCESSFUL
# ################################################################
# test: 044
# format: Select( table=>"t1", fields => [ "a","b","c"], where => [ d=>'\substr(e,1,8)' ] )
# rc: 0
# result: SELECT a, b, c FROM t1 WHERE d = substr(e,1,8)
# status: SUCCESSFUL
# ################################################################
# test: 045
# format: Select( table=>["t1","t2"], fields => [ "t1.a","t2.b" ], where => [ 't1.a' => 't2.b' ] )
# rc: 0
# result: SELECT t1.a, t2.b FROM t1, t2 WHERE t1.a = t2.b
# status: SUCCESSFUL
# ################################################################
# test: 046
# format: Select( table=>"t1", fields => [ {"a"=>"aa"} ], where => [ 'a' => '0' ] )
# rc: 0
# result: SELECT a aa FROM t1 WHERE a = '0'
# status: SUCCESSFUL
# ################################################################
# test: 047
# format: Select( table=>"t1", fields => [ {"t1.a"=>"aa"} ], where => [ 't1.a' => '0' ] )
# rc: 0
# result: SELECT t1.a aa FROM t1 WHERE t1.a = '0'
# status: SUCCESSFUL
# ################################################################
# test: 048
# format: Select( table=>["t1","t2"], fields => [ {"t1.a"=>"aa"}, {"t2.b"=>"bb"} ], where => [ 't1.a' => 't2.b' ] )
# rc: 0
# result: SELECT t1.a aa, t2.b bb FROM t1, t2 WHERE t1.a = t2.b
# status: SUCCESSFUL
# ################################################################
# test: 049
# format: Select( table=>"t1", fields => [ {"sum(a)"=>"a1"}, {"sum(t1.a)"=>"a2"}, {"\sum(a)"=>"a3"} ], where => [ 'a' => '0' ] )
# rc: 0
# result: SELECT sum(a) a1, sum(t1.a) a2, sum(a) a3 FROM t1 WHERE a = '0'
# status: SUCCESSFUL
# ################################################################
# test: 050
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_TOP, limit=>100 )
# rc: 0
# note: Command=TOP, Cursor is empty
# result: SELECT a, b, c FROM t1 ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 051
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_NEXT, limit=>100 )
# rc: 0
# note: Command=NEXT, Cursor is empty
# result: SELECT a, b, c FROM t1 ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 052
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_BACK, limit=>100 )
# rc: 0
# note: Command=BACK, Cursor is empty
# result: SELECT a, b, c FROM t1 ORDER BY a DESC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 053
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_NEXT, limit=>100 )
# rc: 0
# note: Command=NEXT, Cursor is first(1) and last(100)
# result: SELECT a, b, c FROM t1 WHERE a > '100' ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 054
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_BACK, limit=>100 )
# rc: 0
# note: Command=BACK, Cursor is first(101) and last(200)
# result: SELECT a, b, c FROM t1 WHERE a < '101' ORDER BY a DESC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 055
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_RELOAD, limit=>100 )
# rc: 0
# note: Command=RELOAD, Cursor is first(1) and last(100)
# result: SELECT a, b, c FROM t1 WHERE a > '1' ORDER BY a ASC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 056
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_LAST, limit=>100 )
# rc: 0
# note: Command=LAST, Cursor is first(1) and last(100)
# result: SELECT a, b, c FROM t1 ORDER BY a DESC LIMIT 100
# status: SUCCESSFUL
# ################################################################
# test: 057
# format: SelectCursor( table=>"t1", fields => [ "a","b","c"], cursor_info => \%cursor , cursor_key=>"a", cursor_command=>SQL_SIMPLE_CURSOR_TOP, limit=>0 )
# rc: 0
# note: Command=TOP, Limit is ZERO
# result: SELECT a, b, c FROM t1 ORDER BY a ASC
# status: SUCCESSFUL
# ################################################################
# test: 060
# format: Select( table=>"t1", fields => [ "distinct", "a" ] )
# rc: 0
# note: Select with DISTINCT array sequence
# result: SELECT DISTINCT a FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 061
# format: Select( table=>"t1", fields => [ "distinct" => "a" ] )
# rc: 0
# note: Select with DISTINCT based hash
# result: SELECT DISTINCT a FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 062
# format: Select( table=>"t1", fields => [ "count(*)" ] )
# rc: 0
# result: SELECT count(*) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 063
# format: Select( table=>"t1", fields => [ "max(t1.a)" ] )
# rc: 0
# result: SELECT max(t1.a) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 064
# format: Select( table=>"t1", fields => [ "max(a)" ] )
# rc: 0
# result: SELECT max(a) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 065
# format: Select( table=>"t1", fields => [ "substr(a,1,8)" ] )
# rc: 0
# result: SELECT substr(a,1,8) FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 066
# format: Select( table=>"t1", fields => [ "\aaa.bbb.ccc" ] )
# rc: 0
# result: SELECT aaa.bbb.ccc FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 067
# format: Select( table=>"t1", fields => [ "distinct","\aaa.bbb.ccc" ] )
# rc: 0
# result: SELECT DISTINCT aaa.bbb.ccc FROM t1
# status: SUCCESSFUL
# ################################################################
# test: 070
# format: Select( table=>["t1","t2"], fields => [ "t1.a","t2.b" ], where => [ 't1.a' => 't2.b' ], sql_save=>1 )
# rc: 0
# note: SQL_SAVE enabled
# result: SELECT t1.a, t2.b FROM t1, t2 WHERE t1.a = t2.b
# savefile: /tmp/2023/202310/20231009/sql.teste.20231009.31009.1
# savefile: removed
# status: SUCCESSFUL
# ################################################################
# test: 071
# format: Select( table=>"t1", order_by => "t1.a" )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a
# status: SUCCESSFUL
# ################################################################
# test: 072
# format: Select( table=>"t1", order_by => [ {"t1.a" => "asc"} ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a ASC
# status: SUCCESSFUL
# ################################################################
# test: 073
# format: Select( table=>"t1", order_by => [ {"t1.a" => "desc"} ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a DESC
# status: SUCCESSFUL
# ################################################################
# test: 074
# format: Select( table=>"t1", order_by => [ "t1.a", "t1.b" ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a, t1.b
# status: SUCCESSFUL
# ################################################################
# test: 075
# format: Select( table=>"t1", order_by => [ {"t1.a" => "asc"}, "t1.b" ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a ASC, t1.b
# status: SUCCESSFUL
# ################################################################
# test: 076
# format: Select( table=>"t1", order_by => [ "t1.a", {"t1.b"=>"desc"} ] )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.a, t1.b DESC
# status: SUCCESSFUL
# ################################################################
# test: 077
# format: Select( table=>"t1", order_by => {"t1.b"=>"desc"} )
# rc: 0
# result: SELECT * FROM t1 ORDER BY t1.b DESC
# status: SUCCESSFUL
# ################################################################
# 
# To see the input options used to create the 'where' clause, rerun the test with:
# 
# export SQL_SIMPLE_SQL_SHOW_OK=1
# 
t/testSQL.t .... ok
# 
# ################################################################
# result: id = 'info'
# test: 101, SUCCESSFUL
# ################################################################
# result: id = 'info'
# test: 102, SUCCESSFUL
# ################################################################
# result: id != 'info'
# test: 103, SUCCESSFUL
# ################################################################
# result: id < 'info'
# test: 104, SUCCESSFUL
# ################################################################
# result: id > 'info'
# test: 105, SUCCESSFUL
# ################################################################
# result: id LIKE 'info%'
# test: 106, SUCCESSFUL
# ################################################################
# result: id LIKE '%info%'
# test: 107, SUCCESSFUL
# ################################################################
# result: id LIKE '%info'
# test: 108, SUCCESSFUL
# ################################################################
# result: id LIKE 'info'
# test: 109, SUCCESSFUL
# ################################################################
# result: id IS NULL
# test: 110, SUCCESSFUL
# ################################################################
# result: id NOT NULL
# test: 111, SUCCESSFUL
# ################################################################
# result: id IN ('info1','info2')
# test: 112, SUCCESSFUL
# ################################################################
# result: id NOT IN ('info1','info2')
# test: 113, SUCCESSFUL
# ################################################################
# result: id BETWEEN ('info1','info2')
# test: 114, SUCCESSFUL
# ################################################################
# result: id NOT BETWEEN ('info1','info2')
# test: 115, SUCCESSFUL
# ################################################################
# result: id = 'info' AND id = 'info2' AND no = 'no1' AND no = 'no2'
# test: 120, SUCCESSFUL
# ################################################################
# result: id = 'info' AND id = 'info2' OR no = 'no1' AND no = 'no2'
# test: 121, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id
# test: 200, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id
# test: 201, SUCCESSFUL
# ################################################################
# result: t1.id != t2.id
# test: 202, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id AND t1.id = t3.id
# test: 210, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id AND t1.id = t3.id
# test: 211, SUCCESSFUL
# ################################################################
# result: t1.id != t2.id AND t1.id != t3.id
# test: 212, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id OR t1.id = t3.id
# test: 213, SUCCESSFUL
# ################################################################
# result: t1.id = t2.id AND t1.id BETWEEN ('1234','5678') AND (t1.id != '0' OR t2.id != '0')
# test: 214, SUCCESSFUL
# ################################################################
# result: (id = '1' AND id = '2') AND (no = '3' AND no = '4')
# test: 220, SUCCESSFUL
# ################################################################
# result: (id LIKE '1%' OR id LIKE '2%') AND (no LIKE '%3' OR no LIKE '%4')
# test: 221, SUCCESSFUL
# ################################################################
# result: (id NOT LIKE '1%' AND id NOT LIKE '2%') AND (no NOT LIKE '%3' AND no NOT LIKE '%4')
# test: 222, SUCCESSFUL
# ################################################################
# result: (id NOT LIKE '1%' AND id NOT LIKE '2%') OR (no NOT LIKE '%3' AND no NOT LIKE '%4')
# test: 223, SUCCESSFUL
# ################################################################
# result: id NOT NULL OR no IS NULL
# test: 224, SUCCESSFUL
# ################################################################
# result: ((a = '1' AND b = '2') OR (c = '3' AND d = '4')) AND e = '5'
# test: 225, SUCCESSFUL
# ################################################################
# result: a = concat(a,'abc')
# test: 230, SUCCESSFUL
# ################################################################
# result: a != concat(a,'abc')
# test: 231, SUCCESSFUL
# 
# To see the input options used to create the 'where' clause, rerun the test with:
# 
# export SQL_SIMPLE_WHERE_SHOW_OK=1
# 
t/testWhere.t .. ok
All tests successful.
Files=3, Tests=5,  1 wallclock secs ( 0.05 usr  0.05 sys +  0.76 cusr  0.31 csys =  1.17 CPU)
Result: PASS


PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  DBD::SQLite                        1.74        0
	  DBI                               1.643        0
	  Date::Calc                          6.4        0
	  File::Path                         2.18        0
	  File::Spec                         3.78        0
	  IO::File                           1.40        0
	  JSON                               4.10        0
	  Sys::Syslog                        0.35        0
	  Test::More                     1.302195        0

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9914
	CPANPLUS::Dist::Build              0.90
	Cwd                                3.78
	ExtUtils::CBuilder             0.280236
	ExtUtils::Command                  7.70
	ExtUtils::Install                  2.22
	ExtUtils::MakeMaker                7.70
	ExtUtils::Manifest                 1.75
	ExtUtils::ParseXS                  3.44
	File::Spec                         3.78
	Module::Build                    0.4234
	Pod::Parser                        1.63
	Pod::Simple                        3.35
	Test2                          1.302195
	Test::Harness                      3.44
	Test::More                     1.302195
	version                          0.9929

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68

CPANPLUS is prefering Build.PL

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    NONINTERACTIVE_TESTING = 1
    PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = /usr/home/cpan/pit/jail/ousipIfiIg/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.30.2/.cpanplus/5.30.2/build/uFRETr9nvj/SQL-SimpleOps-2023.274.1/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.30.2/.cpanplus/5.30.2/build/uFRETr9nvj/SQL-SimpleOps-2023.274.1/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 30243
    PERL5_CPANPLUS_IS_VERSION = 0.9914
    PERL5_MINISMOKEBOX = 0.68
    PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.30.2
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/ousipIfiIg
    PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/ousipIfiIg"
    PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/ousipIfiIg
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/pit/thr/perl-5.30.2/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 1002 1002
    EGID: $)  = 1002 1002


-------------------------------


--

Summary of my perl5 (revision 5 version 30 subversion 2) configuration:
   
  Platform:
    osname=freebsd
    osvers=12.4-release
    archname=i386-freebsd-thread-multi
    uname='freebsd ffyrc 12.4-release freebsd 12.4-release r372781 generic i386 '
    config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.30.2 -Dusethreads'
    hint=recommended
    useposix=true
    d_sigaction=define
    useithreads=define
    usemultiplicity=define
    use64bitint=undef
    use64bitall=undef
    uselongdouble=undef
    usemymalloc=n
    default_inc_excludes_dot=define
    bincompat5005=undef
  Compiler:
    cc='cc'
    ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
    optimize='-O2'
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
    ccversion=''
    gccversion='FreeBSD Clang 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)'
    gccosandvers=''
    intsize=4
    longsize=4
    ptrsize=4
    doublesize=8
    byteorder=1234
    doublekind=3
    d_longlong=define
    longlongsize=8
    d_longdbl=define
    longdblsize=12
    longdblkind=3
    ivtype='long'
    ivsize=4
    nvtype='double'
    nvsize=8
    Off_t='off_t'
    lseeksize=8
    alignbytes=4
    prototype=define
  Linker and Libraries:
    ld='cc'
    ldflags ='-pthread -Wl,-E  -fstack-protector-strong -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib /usr/lib/clang/13.0.0/lib /usr/lib
    libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil
    perllibs=-lpthread -ldl -lm -lcrypt -lutil
    libc=
    so=so
    useshrplib=false
    libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs
    dlext=so
    d_dlsymun=undef
    ccdlflags=' '
    cccdlflags='-DPIC -fPIC'
    lddlflags='-shared  -L/usr/local/lib -fstack-protector-strong'


Characteristics of this binary (from libperl): 
  Compile-time options:
    HAS_TIMES
    MULTIPLICITY
    PERLIO_LAYERS
    PERL_COPY_ON_WRITE
    PERL_DONT_CREATE_GVSV
    PERL_IMPLICIT_CONTEXT
    PERL_MALLOC_WRAP
    PERL_OP_PARENT
    PERL_PRESERVE_IVUV
    USE_ITHREADS
    USE_LARGE_FILES
    USE_LOCALE
    USE_LOCALE_COLLATE
    USE_LOCALE_CTYPE
    USE_LOCALE_NUMERIC
    USE_LOCALE_TIME
    USE_PERLIO
    USE_PERL_ATOF
    USE_REENTRANT_API
    USE_THREAD_SAFE_LOCALE
  Locally applied patches:
    Devel::PatchPerl 2.08
  Built under freebsd
  Compiled at Apr  4 2023 18:24:35
  %ENV:
    PERL5LIB="/usr/home/cpan/pit/jail/ousipIfiIg/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.30.2/.cpanplus/5.30.2/build/uFRETr9nvj/SQL-SimpleOps-2023.274.1/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.30.2/.cpanplus/5.30.2/build/uFRETr9nvj/SQL-SimpleOps-2023.274.1/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="30243"
    PERL5_CPANPLUS_IS_VERSION="0.9914"
    PERL5_MINISMOKEBOX="0.68"
    PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.30.2"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/ousipIfiIg"
    PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/ousipIfiIg""
    PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/ousipIfiIg"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /usr/home/cpan/pit/jail/ousipIfiIg/lib/perl5/5.30.2/i386-freebsd-thread-multi
    /usr/home/cpan/pit/jail/ousipIfiIg/lib/perl5/5.30.2
    /usr/home/cpan/pit/jail/ousipIfiIg/lib/perl5/i386-freebsd-thread-multi
    /usr/home/cpan/pit/jail/ousipIfiIg/lib/perl5
    /usr/home/cpan/pit/thr/conf/perl-5.30.2/.cpanplus/5.30.2/build/uFRETr9nvj/SQL-SimpleOps-2023.274.1/blib/lib
    /usr/home/cpan/pit/thr/conf/perl-5.30.2/.cpanplus/5.30.2/build/uFRETr9nvj/SQL-SimpleOps-2023.274.1/blib/arch
    /usr/home/cpan/pit/thr/perl-5.30.2/lib/site_perl/5.30.2/i386-freebsd-thread-multi
    /usr/home/cpan/pit/thr/perl-5.30.2/lib/site_perl/5.30.2
    /usr/home/cpan/pit/thr/perl-5.30.2/lib/5.30.2/i386-freebsd-thread-multi
    /usr/home/cpan/pit/thr/perl-5.30.2/lib/5.30.2