Back
From: metabase:user:30977d10-2aae-11df-837a-5e0a49663a4f
Subject: UNKNOWN Tie-GHash-0.12 v5.14.1
Date: 2011-07-08T11:43:09Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Leon Brocard,
This is a computer-generated report for Tie-GHash-0.12
on perl 5.14.1, created by CPAN-Reporter-1.1902.
Thank you for uploading your work to CPAN. However, attempting to
test your distribution gave an inconclusive result.
This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed. You may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from 'C:\bin\dev\psdk\2003\Bin\nmake.EXE':
Microsoft (R) Program Maintenance Utility Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.
cp GHash.pm blib\lib\Tie\GHash.pm
C:\home\stro\perl\perl5141\bin\perl5.14.1.exe -Mblib -MInline=NOISY,_INSTALL_ -MTie::GHash -e1 0.12 blib\arch
'glib-config' is not recognized as an internal or external command,
operable program or batch file.
'glib-config' is not recognized as an internal or external command,
operable program or batch file.
Starting Build Preprocess Stage
Finished Build Preprocess Stage
Starting Build Parse Stage
Finished Build Parse Stage
Starting Build Glue 1 Stage
Finished Build Glue 1 Stage
Starting Build Glue 2 Stage
Finished Build Glue 2 Stage
Starting Build Glue 3 Stage
Finished Build Glue 3 Stage
Starting Build Compile Stage
Starting "perl Makefile.PL" Stage
Note (probably harmless): No library found for INC
Writing Makefile for Tie::GHash
Writing MYMETA.yml
Finished "perl Makefile.PL" Stage
Starting "make" Stage
Microsoft (R) Program Maintenance Utility Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.
C:\home\stro\perl\perl5141\bin\perl.exe C:\home\stro\perl\perl5141\lib\ExtUtils\xsubpp -typemap C:\home\stro\perl\perl5141\lib\ExtUtils\typemap GHash.xs > GHash.xsc && C:\home\stro\perl\perl5141\bin\perl.exe -MExtUtils::Command -e "mv" -- GHash.xsc GHash.c
cl -c -IC:/home/stro/cpan/build/5.14.1/Tie-GHash-0.12-OwVnqg -nologo -GF -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DPERL_TEXTMODE_SCRIPTS -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -D_USE_32BIT_TIME_T -MD -Zi -DNDEBUG -O1 -DVERSION=\"0.12\" -DXS_VERSION=\"0.12\" "-IC:\home\stro\perl\perl5141\lib\CORE" GHash.c
GHash.c
GHash.xs(5) : fatal error C1083: Cannot open include file: 'glib.h': No such file or directory
NMAKE : fatal error U1077: 'cl' : return code '0x2'
Stop.
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
nmake
The build directory was:
C:\home\stro\cpan\build\5.14.1\Tie-GHash-0.12-OwVnqg\_Inline\build\Tie\GHash
To debug the problem, cd to the build directory, and inspect the output files.
at -e line 0
INIT failed--call queue aborted.
NMAKE : fatal error U1077: 'C:\home\stro\perl\perl5141\bin\perl5.14.1.exe' : return code '0x2'
Stop.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- -------
Inline 0.44 0.48
build_requires:
Module Need Have
------------------- ---- -------
ExtUtils::MakeMaker 0 6.57_05
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
COMSPEC = C:\Windows\system32\cmd.exe
INCLUDE = C:\bin\dev\psdk\2003\Include\.;C:\bin\dev\vc\VC98\atl\include;C:\bin\dev\vc\VC98\mfc\include;C:\bin\dev\vc\VC98\include
LIB = C:\bin\dev\psdk\2003\Lib\.;C:\bin\dev\vc\VC98\mfc\lib;C:\bin\dev\vc\VC98\lib
NUMBER_OF_PROCESSORS = 2
PATH = C:\bin\apps\far\;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\bin\sys\msys\bin\;c:\bin\graph\imagemagick-6.5.1-q16;C:\bin\dev\tortoiseSVN;C:\bin\dev\perl\site\bin;C:\bin\dev\perl\bin;c:\bin\run;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\bin\sys\unixutils;C:\bin\dev\tortoiseSVN\bin;C:\bin\sys\sysinternals;C:\bin\db\oracle\instantclient_11_1;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;\;C:\usr\bin;C:\bin\dev\psdk\2003\Bin\.;C:\bin\dev\psdk\2003\Bin\WinNT\.;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Windows Live\Shared;C:\bin\dev\vc\Common\Tools\WinNT;C:\bin\dev\vc\Common\MSDev98\Bin;C:\bin\dev\vc\Common\Tools;C:\bin\dev\vc\VC98\bin;C:\bin\db\postgresql\bin\;C:\bin\dev\psdk\2003\Bin\.;C:\bin\graph\ImageConverterPlus;C:\bin\graph\ImageConverterPlus\Microsoft.VC90.CRT;C:\bin\graph\ImageConverterPlus\Microsoft.VC90.MFC;C:\bin\sys\smartmontools\bin;C:\bin\comm\Nmap
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 4520
PERL5_CPAN_IS_EXECUTING = \home\stro\cpan\build\5.14.1\Tie-GHash-0.12-OwVnqg\Makefile.PL
PERL5_CPAN_IS_RUNNING = 4520
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4620,4520
PERL_AUTOINSTALL = --defaultdeps
PERL_CR_SMOKER_CURRENT = Tie-GHash-0.12
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
PROCESSOR_IDENTIFIER = x86 Family 6 Model 15 Stepping 11, GenuineIntel
TEMP = C:\Windows\Temp
TMPDIR = C:\Windows\Temp
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = C:\home\stro\perl\perl5141\bin\perl5.14.1.exe
$UID/$EUID = 0 / 0
$GID = 0
$EGID = 0
Win32::GetOSName = WinVista
Win32::GetOSVersion = Service Pack 2, 6, 0, 6002, 2, 2, 0, 768, 1
Win32::FsType = NTFS
Win32::IsAdminUser = 1
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9600
Cwd 3.36
ExtUtils::CBuilder 0.280203
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.57_05
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2210
File::Spec 3.33
Module::Build 0.3800
Module::Signature n/a
Test::Harness 3.23
Test::More 0.98
YAML 0.73
YAML::Syck 1.17
version 0.88
--
Summary of my perl5 (revision 5 version 14 subversion 1) configuration:
Platform:
osname=MSWin32, osvers=6.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cl', ccflags ='-nologo -GF -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DPERL_TEXTMODE_SCRIPTS -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -D_USE_32BIT_TIME_T',
optimize='-MD -Zi -DNDEBUG -O1',
cppflags='-DWIN32'
ccversion='12.00.8804', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"c:\home\stro\perl\perl5141\lib\CORE" -machine:x86'
libpth=\lib
libs=oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib comctl32.lib msvcrt.lib
perllibs=oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib comctl32.lib msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=true, libperl=perl514.lib
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"c:\home\stro\perl\perl5141\lib\CORE" -machine:x86'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_IMPLICIT_SYS
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PL_OP_SLAB_ALLOC
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_PERL_ATOF
Built under MSWin32
Compiled at Jun 23 2011 23:01:35
%ENV:
PERL5_CPANPLUS_IS_RUNNING="4520"
PERL5_CPAN_IS_EXECUTING="\home\stro\cpan\build\5.14.1\Tie-GHash-0.12-OwVnqg\Makefile.PL"
PERL5_CPAN_IS_RUNNING="4520"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="4620,4520"
PERL_AUTOINSTALL="--defaultdeps"
PERL_CR_SMOKER_CURRENT="Tie-GHash-0.12"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
C:/home/stro/perl/perl5141/site/lib
C:/home/stro/perl/perl5141/lib
.