AnyEvent-JSONRPC v0.15 Perl 5 v5.27.9 x86_64-linux-ld
- Status
- Fail
- From
- Andreas J. König (ANDK)
- Dist
-
AnyEvent-JSONRPC v0.15
- Platform
- Perl 5 v5.27.9 x86_64-linux-ld
- Date
- 2018-01-23 12:57:40
- ID
- fea362ac-003c-11e8-ab51-9ce6844c4334
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Peter Makholm,
This is a computer-generated report for AnyEvent-JSONRPC-0.15
on perl 5.27.9, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/tmp/basesmoker-reloperl-1lAc/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
# Failed test 'use AnyEvent::JSONRPC::HTTP::Client;'
# at t/00_compile.t line 8.
# Tried to use 'AnyEvent::JSONRPC::HTTP::Client'.
# Error: Can't locate AnyEvent/HTTP.pm in @INC (you may need to install the AnyEvent::HTTP module) (@INC contains: /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/site_perl/5.27.9/x86_64-linux-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/site_perl/5.27.9 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/5.27.9/x86_64-linux-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/5.27.9 .) at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/HTTP/Client.pm line 11.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/HTTP/Client.pm line 11.
# Compilation failed in require at (eval 281) line 2.
# BEGIN failed--compilation aborted at (eval 281) line 2.
# Failed test 'use AnyEvent::JSONRPC::HTTP::Server;'
# at t/00_compile.t line 9.
# Tried to use 'AnyEvent::JSONRPC::HTTP::Server'.
# Error: Can't locate AnyEvent/HTTPD.pm in @INC (you may need to install the AnyEvent::HTTPD module) (@INC contains: /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/site_perl/5.27.9/x86_64-linux-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/site_perl/5.27.9 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/5.27.9/x86_64-linux-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/5.27.9 .) at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/HTTP/Server.pm line 11.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/HTTP/Server.pm line 11.
# Compilation failed in require at (eval 284) line 2.
# BEGIN failed--compilation aborted at (eval 284) line 2.
# Looks like you failed 2 tests of 6.
t/00_compile.t .........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/6 subtests
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
t/client_error.t ....... ok
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
t/disconnect.t ......... ok
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
t/disconnect_server.t .. ok
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
t/mix_request.t ........ ok
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
t/multi_connection.t ... ok
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
t/simple_echo.t ........ ok
Possible precedence issue with control flow operator at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Redundant argument in sprintf at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/inc/Spiffy.pm line 222.
Any::Moose is deprecated. Please use Moo instead at /tmp/loop_over_bdir-6479-QUDZM6/AnyEvent-JSONRPC-0.15-0/blib/lib/AnyEvent/JSONRPC/TCP/Client.pm line 2.
t/simple_echo_dsl.t .... ok
Test Summary Report
-------------------
t/00_compile.t (Wstat: 512 Tests: 6 Failed: 2)
Failed tests: 4-5
Non-zero exit status: 2
Files=8, Tests=31, 7 wallclock secs ( 0.03 usr 0.04 sys + 2.44 cusr 0.34 csys = 2.85 CPU)
Result: FAIL
Failed 1/8 test programs. 2/31 subtests failed.
Makefile:814: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Any::Moose 0 0.27
AnyEvent 5.12 7.14
Filter::Util::Call 0 1.58
JSON::RPC::Common 0 0.11
JSON::XS 2.22 3.04
Moose 0 2.2009
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 6.42 7.30
Test::More 0 1.302120
Test::TCP 0 2.19
configure_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 6.42 7.30
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 13874
PERL5_CPAN_IS_RUNNING = 13874
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-1lAc/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.20
CPAN::Meta 2.150010
Cwd 3.72
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.30
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.36
File::Spec 3.72
JSON 2.97001
JSON::PP 2.97001
Module::Build 0.4224
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.39
Test::More 1.302120
YAML 1.24
YAML::Syck 1.30
version 0.9918
--
Summary of my perl5 (revision 5 version 27 subversion 9) configuration:
Commit id: ef7498d2b69936a5c6476ecf1950066f638b2dac
Platform:
osname=linux
osvers=4.14.0-3-amd64
archname=x86_64-linux-ld
uname='linux k93msid 4.14.0-3-amd64 #1 smp debian 4.14.12-2 (2018-01-06) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Duselongdouble -DEBUGGING=none'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='7.2.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.26.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.26'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jan 21 2018 21:12:20
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="13874"
PERL5_CPAN_IS_RUNNING="13874"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/site_perl/5.27.9/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/site_perl/5.27.9
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/5.27.9/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.27.8-10-gef7498d2b6/ea6b/lib/5.27.9
.